Abstract:Passive isolation has been widely accepted as an effective means for the protection of structures against seismic hazards. The isolation bearings, typically placed at the base of the structure, increase the flexibility of the structure and shift its fundamental frequency away from the dominant frequency of seismic excitations, resulting in significantly reduced interstory drifts and floor accelerations. During severe earthquakes, the performance of passive isolation systems is usually achieved at the expense of having large base displacements. Alternatively, active isolation combines isolation bearings with adaptive actuators to effectively mitigate the base displacements, while maintaining reasonable interstory drifts and floor accelerations. Despite successfully theoretical proof documented in previous studies, most experimental implementations only verified active isolation with unit-axial actuators under unidirectional excitations. Earthquakes are intrinsically multidimensional, resulting in out-of-plane responses such as torsional responses. Therefore, the focus of this paper is the development and experimental verification of active isolation strategies for multistory buildings subjected to bidirectional earthquake loadings. First, a model building is designed to be dynamically similar to a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multidimensional response control, three custom-manufactured and appropriately scaled actuators are employed to mitigate both in-plane and out-of-plane responses. In addition, the structure is subjected to multi-directional earthquake ground motion. To obtain a high-fidelity model of the active isolation systems, the authors propose a hybrid identification approach, which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction is also included in the identified model to further enhance the control authority. By employing the H-2/LQG control algorithm, the controllers for the hydraulic actuators are shown to offer high performance and good robustness. Active isolation is found to possess the ability to reduce base displacements and produce comparable accelerations and interstory drifts to passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six-degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign. Copyright (c) 2013 John Wiley & Sons, Ltd.

SEISMIC RESPONSE ANALYSIS OF ISOLATED PROTECTION DEVICE WITH VARIABLE-STIFFNESS FOR BASE-ISOLATED BUILDINGS

A Direct Displacement-Based Design Procedure for Base-Isolated Building Structures with Lead Rubber Bearings (Lrbs)

Analysis model for long-span isolated structure subjected to multi-support earthquake excitations

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Theoretical study on the design and application of the sliding base isolation structure

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

SEISMIC RESPONSE AND HYSTERETIC PERFORMANCE ANALYSIS OF PARALLEL COMPOSITE ISOLATED STRUCTURE

Analytical and numerical investigations of base isolation system with negative stiffness devices

Performance Analysis and Comparison of Two Base Isolation Systems with Super-Large Displacement Friction Pendulum Bearings

Research on the design method of base-isolated structure of Suqian Renfang Zhihui Building

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

Study on Building Moving and Isolation

Application Study on Elastic Sliding Bearings in Isolated High-rise Building

Test study on dynamic characteristics of base-isolated structure on variable stiffness foundation

VIBRATION ANALYSIS OF BASE-ISOLATED BUILDING NEAR URBAN RAIL TRANSIT

Multiaxial Active Isolation for Seismic Protection of Buildings

Seismic Analysis of Reticulated Shell Structure Based on Sensor Network for Smart Transportation Seismic Isolation Bearings

Experiment investigation and seismic performance evaluation of hybrid isolation bearing with uncoupled compression and shear mechanism

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Wind-Induced Dynamic Response of Inter-Story Isolated Tall Buildings with Friction Pendulum Bearing Based on an Enhanced Simplified Model