Abstract:Seismic isolation has become a widely accepted method for the protection of structures and nonstructural components. However, this control strategy is unfavorable against near-fault earthquakes, particularly those featuring velocity-pulse effects. Excessive isolation displacements and accelerations can occur during such earthquakes, resulting in amplified responses of the superstructure. To resolve this problem, this study develops a prototype of the eccentric rolling isolation system consisting of one platform eccentrically pin-connected to four circular rollers. The eccentric pin connection yields a nonlinear restoring force of the proposed system and results in displacement-dependent resonances, and the inherent mechanical friction also yields an energy dissipation capability of the system. As the magnitude of ground excitation increases, the prototype system generates a lower resonant frequency away from the dominant frequencies of earthquakes. This behavior is experimentally investigated and verified for mechanical behavior and seismic performance. In the experiment, sinusoidal, far-field, and near-fault ground motions are considered in shaking table testing. Some parameters, such as the eccentricity, roller size, and inertial force, are also experimentally investigated. As found in the experimental result, the feasibility of the prototype system is successfully verified. Meanwhile, the comparable simulation results further validate the mathematical model of the prototype system. Consequently, the eccentric rolling isolation system has demonstrated isolation effectiveness against far-field ground motions and has good potential to perform better than a linear system under near-fault ground motions.

SEISMIC RESPONSE AND HYSTERETIC PERFORMANCE ANALYSIS OF PARALLEL COMPOSITE ISOLATED STRUCTURE

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Seismic Response Analysis of Composite Isolation Structures with Non-Classical Damping

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Response Adjustability Analysis of Partial and Ordinary Differential Coupling System for Visco-Elastomer Sandwich Plate Coupled with Distributed Masses under Random Excitation via Spatial Periodicity Strategy

Study on a conical bearing for acceleration-sensitive equipment

Analysis on Seismic Behavior of Light Composite Structure(part II)——Analysis of Law of Hysteresis Loop,Displacement Response and Base Shear Response

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Evaluation and Performance Testing of Eccentric Rolling Isolation System

Dynamic Performance Analysis of a Seismically Isolated Bridge under Braking Force

INFLUENCE OF DAMPING MODELS ON DYNAMIC ANALYSES OF A BASE-ISOLATED COMPOSITE STRUCTURE UNDER EARTHQUAKES AND ENVIRONMENTAL VIBRATIONS

Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables

Experiment investigation and seismic performance evaluation of hybrid isolation bearing with uncoupled compression and shear mechanism

VIBRATION ANALYSIS OF BASE-ISOLATED BUILDING NEAR URBAN RAIL TRANSIT

The seismic response analysis of offshore base isolation structure

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Mechanical Behavior of Laminated Rubber Isolation Bearing with Buckling Steel Plate

Tests, model, and applications for coned-disc-spring vertical isolation bearings