Abstract:Elastomeric isolation bearings exhibit complex coupled horizontal-vertical behavior. Most existing macroscopic models simulate the quasistatic test results well but have deficiencies in simulating the dynamic behavior of bearings. In this paper, the experimental observations of previous dynamic bearing tests were investigated. The simulation capacity of existing macroscopic models was checked by comparison with the test data. The results show that the calculated axial load and hysteresis loops exhibit undesired oscillations under dynamic excitation. The intrinsic deficiency of existing models in simulating the dynamic response of a bearing was identified as the coupling or off-diagonal terms in the tangent stiffness matrix and the variation of vertical stiffness of the model. Motivated from this key observation, a new macroscopic model was developed to account for the dynamic behavior of bearings, followed by the suggestion of its numerical implementation. Through the introduction of a new axial load expression, the tangent stiffness matrix of the new model was semidecoupled, and the vertical stiffness of the new model remains unchanged, which reduced the interaction between the horizontal and vertical behavior. The simulation capacity of the new model was then validated by comparison with previous test data. The results show that the new model effectively captures the axial load variation and hysteresis loop of the bearings under dynamic excitations. Moreover, it was found that the consideration of the bearing height improved the simulation accuracy, and the size effect of the bearing is critical for isolated structures with large bearing-to-superstructure-height ratio, such as low- to medium-span bridges.

Tests, model, and applications for coned-disc-spring vertical isolation bearings

Coned Disc Spring Compound Vertical Isolation: Testing and Modelling

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Theoretical and experimental investigation on disc spring isolation system with loading rings

Study on a conical bearing for acceleration-sensitive equipment

New Macroscopic Model for Simulating the Dynamic Behavior of Elastomeric Bearings

Hysteretic behavior of high damping rubber bearings under multiaxial excitation

Mechanical Performance Tests of a Novel Three-dimensional Isolation Bearing

Modelling and testing of the dynamic support stiffness of assembled bearings in motorized spindles

Numerical and Experimental Research on Dynamic Performance of Ball Bearings-Offset Disk Rotor System

EXPERIMENTAL STUDY ON A VIBRATION ISOLATION SYSTEM WITH VISCOUS DAMPING AND CUBIC NONLINEAR DISPLACEMENT

Dynamic characteristics of spindle-bearing with tilted pedestal and clearance fit

Theoretical and Experimental Study on Dynamic Coefficients and Stability for a Hydrostatic/Hydrodynamic Conical Bearing

Concept, analysis, and test of a self‐centering viscous damper with displacement capacity enhancement

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Investigation on the free vibration characteristics of vertical quasi-zero stiffness isolation system considering the disc spring's loading position