Abstract:Abstract The use of low transformation temperature (LTT) filler materials represents a smart approach for increasing the fatigue strength of welded high strength steel structures apart from the usual procedures of post weld treatment. The main mechanism is based on the effect of the low start temperature of martensite formation on the stress already present during welding. Thus, compressive residual stress formed due to constrained volume expansion in connection with phase transformation become highly effective. Furthermore, the weld metal has a high hardness that can delay the formation of fatigue cracks but also leads to low toughness. Fundamental investigations on the weldability of an LTT filler material are presented in this work, including the characterization of the weld microstructure, its hardness, phase transformation temperature and mechanical properties. Special attention was applied to avoid imperfections in order to ensure a high weld quality for subsequent fatigue testing. Fatigue tests were conducted on the welded joints of the base materials S355J2 and S960QL using conventional filler materials as a comparison to the LTT filler. Butt joints were used with a variation in the weld type (DY-weld and V-weld). In addition, a component-like specimen (longitudinal stiffener) was investigated where the LTT filler material was applied as an additional layer. The joints were characterized with respect to residual stress, its stability during cyclic loading and microstructure. The results show that the application of LTT consumables leads to a significant increase in fatigue strength when basic design guidelines are followed. This enables a benefit from the lightweight design potential of high-strength steel grades.

Novel method of thermite welding

Effect of Burning Rate on Solidification Microstructure of Thermite Welds

The Efficiency of Thermite-Assisted Underwater Wet Flux-Cored Arc Welding Process: Electrical Dependence, Microstructural Changes, and Mechanical Properties

A novel dynamic self-constrained explosive welding method for manufacturing copper-steel bimetallic tube

A novel molten wire tungsten inert gas welding process

Microstructure and mechanical properties of cemented carbide to steel joints by electron beam welding

Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding

A novel low carbon steel/hypereutectic high-chromium white cast iron welded joint with heterogeneous structure

Influences of preheating parameters on the quality of weld by thermite rail welding

Capability of martensitic low transformation temperature welding consumables for increasing the fatigue strength of high strength steel joints

Dissimilar gas tungsten arc welding of TC4 titanium to 304 stainless steel using CuSi3 filler wire

Joining mechanism evolution of fusion welded TC4 titanium alloy/304 stainless steel dissimilar joint by GTAW

Comparison of feasibility, microstructure and performance of hybrid laser arc, activated flux tungsten inert gas and friction stir welding for thick plate of innovative ultra-pure ferritic stainless steel

Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid welding

Microstructures and mechanical properties of powder-filled laser welding joints composed of high-nitrogen steel

The Microstructure and Mechanical Properties of TA1-Low Alloy Steel Composite Plate Manufactured by Explosive Welding

Insights into microstructure evolution and fracture mechanisms of welded joints of high strength steel patchwork components

Numerical Study on Mechanism of Explosive Welding

A novel zero tool defect accelerated friction stir thin sheet welding technique for automotive light-weight structural component fabrication with dissimilar material

Weld Formation Mechanism and Microstructural Evolution of TC4/304 Stainless Steel Joint with Cu-Based Filler Wire and Preheating

The butt of CP-Ti/304 stainless steel and CP-Ti/T2 bimetallic sheets using laser-induction heating welding technology