Abstract:Silicon etching is a process that is regularly employed in the semiconductor industry for many applications ranging from micromachining on the sub-millimeter scale to intricate pattern formation in tens of nanometer regime. Wet etching is used for bulk silicon removal. Such etching processes, generally, involve multiple chemical reactions where a liquid solution of etching agents removes surface atoms of silicon through chemical or electrochemical redox reactions at the substrate-etchant interface. Many wet etching processes are anisotropic, and thus the wet etching of silicon with hydroxide solutions tends to be direction or crystalline plane specific, allowing for directional control and reduced undercutting of any etch mask. An additional advantage of metal hydroxide etchants rise from their selective nature of extremely poor etch rate towards the basic oxide of silicon. This makes growing the hard mask of SiO2 a very cost effect step in the wet etching process. NaOH and KOH solutions are well known wet etching agents that offer inexpensive alternatives to anisotropic dry etching but are often either difficult to control (etch rate-wise) or result in rough etched surfaces. Only through better understanding of the chemical reaction mechanisms, i.e. the role of alkali metal cations and water molecules during the wet etching process more controllability and desired etch surface profiles can be achieved. This study summarizes the results from a series of wet etch processes with all the five different group 1 alkali metal oxides and discusses in detail how different types of group 1 metal ions impact the dynamics of the chemical reactions in the aqueous medium. Wet etching assisted by smaller cations like Li+ tend to be more controllable while larger cations like Cs+ result in much faster etch rates. Surfactants added to fast etching metal hydroxides result in finer sidewalls and smoothened etched surface on silicon. Later in the paper, the effect of microwave irradiation on the surface tension, structural arrangement of water molecules and its application in anisotropic etching are highlighted. Step by step details of the experiments are provided in the materials and methods section making the study easy to understand. Line profile plots, optical images, SEM micrographs and XRD intensity plots are presented throughout the report to support the given explanations. Research findings from the study experimentally establish a trend for anisotropic etch rates of silicon substrate with aqueous solutions of all the group 1 alkali metal hydroxides. Silicon etch rate increases down the group.

Micro-Fabrication of Crystalline Silicon by Controlled Alkali Etching

Fabrication of 3D structure by combining AFM and chemical etching on crystalline silicon surface

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Anelastic grain-boundary relaxation arising from solid solution of chromium in polycrystalline Al2O3

Controllable Si (100) Micro/nanostructures by Chemical-Etching-assisted Femtosecond Laser Single-Pulse Irradiation

The Micro-Fabrication of Multidimensional Structure of Silicon by Selection Corrosion

Method for Fabricating Micro/Nanostructures Via Scanning Probe Microscope and Anisotropic Wet Etching

Fabrication of Vertical Sidewalls by Anisotropic Etching of Silicon (100) Wafers

Micro-machinability of Monocrystal Silicon by Direct Etching Using Excimer Laser

Application of KOH Anisotropic Etching in the Fabrication of MEMS Devices

Fabrication of Microcrystalline Silicon Thin Film and the Study of Its Microstructure and Stability

Effect of Isopropyl Alcohol Concentration and Etching Time on Wet Chemical Anisotropic Etching of Low-Resistivity Crystalline Silicon Wafer

Morphological and crystallographic evolution of patterned silicon substrate etched in TMAH solutions

Aqueous Wet Etching of Silicon With Alkali Metal Hydroxides

Versatile Approach of Silicon Nanofabrication without Resists: Helium Ion-Bombardment Enhanced Etching

Study of Excimer Laser Electrochemical Etching Silicon

Selective etching of focused gallium ion beam implanted regions from silicon as a nanofabrication method

Toward Controllable Wet Etching of Monocrystalline Silicon: Roles of Mechanically Driven Defects

An Etching Method for Fabricating Anisotropic Silicon Nanostructures with Vertical and Smooth Sidewalls

Fabrication of Nano-Silicon-Tips Based on Anisotropic Wet Etching Technique

Fabrication of antireflective layers on silicon using metal-assisted chemical etching with in situ deposition of silver nanoparticle catalysts