Abstract:Waterborne polyurethane are more eco-friendly materials due to lower volatile organic compounds (VOCs, mainly isocyanates) content than the alternative materials. However, these rich hydrophilic groups polymers have not yet reached good mechanical properties, durability and hydrophobicity behaviors. Therefore, hydrophobic waterborne polyurethane has become a research hotspot, attracting significant attention. In this work, firstly, a novel fluorine-containing polyether P(FPO/THF) was synthesized by cationic ring-opening polymerization of 2-(2,2,3,3-tetrafluoro-propoxymethyl)-oxirane (FPO) and tetrahydrofuran (THF). Secondly, fluorinated polymer P(FPO/THF), isophorone diisocyanate (IPDI) and hydroxy-terminated polyhedral oligomeric silsesquioxane (POSS-(OH)8) were used to prepare a new fluorinated waterborne polyurethane (FWPU). Hydroxy-terminated POSS-(OH)8 was used as a cross-linking agent, while dimethylolpropionic acid (DMPA) and triethylamine (TEA) were used as a catalyst. Four kinds of waterborne polyurethanes (FWPU0, FWPU1, FWPU3, FWPU5) were obtained by adding different contents of POSS-(OH)8 (0%, 1%, 3%, 5%). The structures of the monomers and polymers were verified by 1H NMR and FT-IR, and the thermal stabilities of various waterborne polyurethanes were analyzed by thermogravimetric analyzer (TGA) and differential scanning calorimetry (DSC). As the results, the thermal analysis showed that the FWPU performed the good thermal stability and the glass transition temperature could reach at about −50 °C. The FWPU1 film exhibited that the elongation at break was 594.4 ± 3.6% and the tensile strength at break was 13.4 ± 0.7 MPa, elucidating that the FWPU1 film developed the excellent mechanical properties relative to the alternative FWPUs. Further, the FWPU5 film performed the promising properties, including the higher surface roughness of FWPU5 film (8.41 nm) obtained by the atomic force microscope (AFM) analysis, and the higher value of water contact angle (WCA) at 104.3 ± 2.7°. Those results illustrated that the novel POSS-based waterborne polyurethane FWPU containing a fluorine element could develop the excellent hydrophobicity and mechanical properties.

Synthesis and Characterization of Novel Thermosetting Polyphosphazene‐urethanes

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

High Cis-1,4 Hydroxyl-Terminated Polybutadiene-Based Polyurethanes with Extremely Low Glass Transition Temperature and Excellent Mechanical Properties

Polyhydroxyurethanes (PHUs) Derived from Diphenolic Acid and Carbon Dioxide and Their Application in Solvent- and Water-Borne PHU Coatings

Synthesis and Thermal Degradation Behaviours of Novel Phosphorus-Containing Polyurethane Elastomers

Preparation of Phosphorous-Containing Poly(Epichlorohydrin) and Polyurethane from A Novel Synthesis Route

Study on Synthesis and Properties of Novel HTPB/PEG Polyurethane Copolymers

Studies on the Synthesis and Properties of Aliphatic Thermoplastic Polyurethanes via Non-isocyanate Route

Synthesis and Characterization of Biodegradable Polyurethanes with Unsaturated Carbon Bonds Based on Poly(Propylene Fumarate)

Synthesis, characterization and properties of a novel fluorinated polyurethane

Oxime-Based and Catalyst-Free Dynamic Covalent Polyurethanes

Synthesis and properties of reactive polyurethane hot melt adhesive based on a novel phosphorus-nitrogen-containing polyol

Synthesis and Properties of ROS-responsive Biodegradable Polyurethanes with Unsaturated Double Bonds

Study of a Novel Fluorine-Containing Polyether Waterborne Polyurethane with POSS as a Cross-Linking Agent

Kinetics of deësterification of pectin.

Synthesis and characterization of non-ionic flame-retardant waterborne polyurethane

A Novel Polyurethane Prepolymer As Toughening Agent: Preparation, Characterization, and Its Influence on Mechanical and Flame Retardant Properties of Phenolic Foam

Synthesis, phase behavior, and simulated in vitro degradation of novel HTPB-b-PEG polyurethane copolymers

Aliphatic Thermoplastic Poly(Ether Urethane)S Having Long Peg Sequences Synthesized Through A Non-Isocyanate Route

Dynamic Multiphase Semi-Crystalline Polymers Based on Thermally Reversible Pyrazole-Urea Bonds

Synthesis and characterization of new type polytetrahydrofuran polyol