Abstract:Refrigerant generating bubble pump (RGBP) is the main component of diffusion absorption heat transformer (diffusion AHT), which is of great significance for waste heat recovery and lack of theoretical and experimental investigations. In present work, a high-accuracy semi-empirical model with H2O-CaCl2-R134a of good thermal stability has been firstly proposed by introducing generation and friction coefficients, which correlated geometry and operational parameters. The performance of RGBP with five independent operational parameters was calculated by the model. Moreover, experiments with five independent operational parameters were conducted by a closed setup, to validate the availability of the semi-empirical model. In the theoretical and experimental analyses, the refrigerant flow rate was used to evaluate generating performance, while the solution flow rate and pumping ratio were used to evaluate pumping performance. The results were concluded that: (1) the mean relative errors of refrigerant and solution flow rates between experimental and theoretical results were rapidly reduced from 103.34 % and 340.66 % to 18.29 % and 5.46 % by using the semi-empirical model; (2) higher generating temperature, larger diffusion gas flow rate, smaller concentration and lower system pressure promoted refrigerant generation; (3) higher motive head and smaller diffusion gas flow rate led to the increase of the solution flow rate and pumping ratio. The investigations may partially reveal the operation mechanism of RGBP, and the semi-empirical model is useful to predict performance of RGBP and choose suitable conditions of RGBP for the diffusion AHT with better performance.

Theoretical and Experimental Research on the Working Process of Screw Refrigeration Compressor under Superfeed Condition

Performance evaluation and energy-saving potential comparison of a heat-powered novel compression-enhanced ejector refrigeration cycle with an economizer

Comparative Studies of Ejector-Expansion Vapor Compression Refrigeration Cycles for Applications in Domestic Refrigerator-Freezers

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Thermodynamic Analyses of Scroll Refrigeration System with Economizer

Theoretical Investigation of Trans-Critical Carbon Dioxide Refrigeration System with a Compressor Economizer

Theoretical and Experimental Research on the Performance of a Refrigerant Generating Bubble Pump with a High-Accuracy Semi-Empirical Model

Theoretical Analysis of a Transcritical CO_2 Vapor Compression/ejection Refrigeration Cycle

Comparative Study on the Energy Performance of Two Different Absorption-Compression Refrigeration Cycles Driven by Low-Grade Heat

Research on Effects of Vapor Injection on Twin-screw Compressor Performance

Investigation of characteristics of discharge pressure pulsation in a twin-screw refrigeration compressor

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Performance Simulation on Economizer System Coupled with Scroll Compressor

Numerical Research on the Scroll Compressor with Refrigeration Injection

Numerical Analysis on the Effects of Refrigerant Injection on the Scroll Compressor

Performance optimization of a heat pump integrated with a single-screw refrigeration compressor with liquid refrigerant injection

Theoretical and experimental investigation on the rolling piston compressor with enhance vapor injection for heat pump system{fr}Etude théorique et expérimentale sur le compresseur à piston laminé avec injection de vapeur améliorée pour le système de pompe à chaleur

Simulation Study on Single-machine Two-chamber In-parallel Compression Refrigeration/Heat Pump System