Abstract:Some different amounts of nano-sized Ni powder (from 1 to 30vol.%) have been mixed with BaTiO3-based EIA X7R ceramic powders used in base metal electrode (BME) multilayer ceramic capacitors (MLCC). The X-ray diffraction (XRD) analysis indicated that no phases other than BaTiO3 and Ni were present in the doped ceramics and further suggested that no reaction took place between BaTiO3 and Ni during sintering under reducing atmosphere. The scanning electronic microscope (SEM) observation showed that the Ni particles presented homogeneous distribution in BaTiO3 ceramic matrix. It was found that the relative density decreased with increasing Ni-content while the dielectric constant at broad temperature range increased. The dielectric constant at room temperature of the ceramic with Ni-content of 28vol.% is about 6000, 2.5 times of Ni-free ceramics, 2500. When Ni-content is 30%, the ceramic became a conductor. The temperature coefficient of capacitors (TCC) of the ceramics showed decline with the increase of Ni-content. The percolation theory of insulator–metal transitions can explain the enhancement of dielectric constant. The percolation threshold of the ceramic–metal composites for dielectric constants at room temperature, fc, is 37vol.% and the critical exponent, p, is 0.6. The dielectric losses, tgδ showed the similar phenomena with ε.

Synthesis and characterization of BaTiO3-coated Ni particles

Preparation and Characterization of Highly Crystallized BaTiO3layer on Ni Nanoparticles

Uniform Coating of BaTiO3–Dy2O3–SiO2 Compound Nano Layer on Ni Particles for MLCC Electrode

Coating of Crystalline BaTiO 3 Layer on Ni Nanoparticles for Multilayer Ceramic Capacitor Electrode

A novel approach to the preparation of a highly crystallized BaTiO 3 layer on Ni nanoparticles

Preparation of Nano BaTiO3‐Based Ceramics for Multilayer Ceramic Capacitor Application by Chemical Coating Method

Enhancement of Dielectric Properties by Additions of Ni Nano-Particles to A X7r-Type Barium Titanate Ceramic Matrix

Effect of Rare Earth Oxide Content on Nanograined Base Metal Electrode Multilayer Ceramic Capacitor Powder Prepared by Aqueous Chemical Coating Method

Chemically Bonded Biphase Coating of Ni-Rich Layered Oxides with Enhanced High-Voltage Tolerance and Long-Cycle Stability

Improved Energy Storage Properties of Fine-Crystalline Batio3 Ceramics by Coating Powders with Al2o3 and Sio2

Room temperature synthesis of BaTiO3 nanoparticles using titanium bis(ammonium lactato) dihydroxide

Co firing behaviors between nickel electrode and BaTiO3 ceramics in MLCC

Fabrication of homogeneous nanosized nickel powders using a planetary ball mill: Applications to multilayer ceramic capacitors (MLCCs)

Effects of BaTiO3 powder particle sizes on dielectric properties of Ni-MLCC ceramics

Synthesis and Characterization of Ba(Zr0.15Ti0.85)O3 Nano Powders by Oxalate Precipitation Method

Preparation of BME MLCC powders by aqueous chemical coating method

Micropatterning of Ni particles on a BaTiO3 green sheet using a self-assembled monolayer

A Low-Temperature Coating Method with H3BO3 for Enhanced Electrochemical Performance of Ni-rich LiNi0.82Co0.12Mn0.06O2 Cathode

Electrode–Ceramic Inter‐Diffusion of Ba(Ti,Zr)O3‐Based Y5V MLCCs with Ni Electrodes

Electrochemical Synthesis of Nb-Doped BaTiO3 Nanoparticles with Titanium-Niobium Alloy as Electrode

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods