Abstract:The reliability of computational fluid dynamics (CFD) codes is checked by comparing simulations with experimental data. A typical data set consists chiefly of velocity and temperature readings, both ideally having high spatial and temporal resolution to facilitate rigorous code validation. While high resolution velocity data is readily obtained through optical measurement techniques such as particle image velocimetry, it has proven difficult to obtain temperature data with similar resolution. Traditional sensors such as thermocouples cannot fill this role, but the recent development of distributed sensing based on Rayleigh scattering and swept-wave interferometry offers resolution suitable for CFD code validation work. Thousands of temperature measurements can be generated along a single thin optical fiber at hundreds of Hertz. Sensors function over large temperature ranges and within opaque fluids where optical techniques are unsuitable. But this type of sensor is sensitive to strain and humidity as well as temperature and so accuracy is affected by handling, vibration, and shifts in relative humidity. Such behavior is quite unlike traditional sensors and so unconventional installation and operating procedures are necessary to ensure accurate measurements. This paper demonstrates implementation of a Rayleigh scattering-type distributed temperature sensor in a thermal mixing experiment involving two air jets at 25 and 45 °C. We present criteria to guide selection of optical fiber for the sensor and describe installation setup for a jet mixing experiment. We illustrate sensor baselining, which links readings to an absolute temperature standard, and discuss practical issues such as errors due to flow-induced vibration. This material can aid those interested in temperature measurements having high data density and bandwidth for fluid dynamics experiments and similar applications. We highlight pitfalls specific to these sensors for consideration in experiment design and operation.

Application of Flotherm Software in Thermal Design for High-temperature Circuit of Fiber Logging

Study On Frequency Response Characteristics Of High-Temperature Fiber Optic Sensor Head

Analysis on the Temperature Fluctuating of FOG′s Source

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Parallel Simulation of Electromagnetic and Thermal Characteristic in RF Component

Simulation of Heat Dissipation in a Closed Enclosure Based On Flotherm

Thermal Optimization of a Logging Tool Used in High Temperature Downhole Environment

Thermal Optimization of High-Temperature Downhole Electronic Devices

Heat Dissipation Design of Photovoltaic Inverter Based on Analysis of Flotherm

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

Real-Time Temperature Monitoring under Thermal Cycling Loading with Optical Fiber Sensor

Thermal Management of the High-power Electronics in High Temperature Downhole Environment

Distributed optical fiber monitoring test and numerical simulation analysis of water-heat coupling process

Thermal Management Of Downhole Electronics Cooling In Oil & Gas Well Logging At High Temperature

Thermal Design and Structure Optimization of a Signal Controlling and Processing Equipment

Thermal Analysis and Optimal Design of Artillery Integrated Electronic Case Based on FloEFD

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping

Distributed thermal management system for downhole electronics at high temperature

Thermal Management for High-Power Downhole Electronics Using Liquid Cooling and PCM under High Temperature Environment

Simulation of non-isothermal resin transfer molding process cycle and optimization of temperature system