Abstract:Purpose This paper aims to present a pipeline to progressively deal with the online external parameter calibration and estimator initialization of the Stereo-inertial measurement unit (IMU) system, which does not require any prior information and is suitable for system initialization in a variety of environments. Design/methodology/approach Before calibration and initialization, a modified stereo tracking method is adopted to obtain a motion pose, which provides prerequisites for the next three steps. Firstly, the authors align the pose obtained with the IMU measurements and linearly calculate the rough external parameters and gravity vector to provide initial values for the next optimization. Secondly, the authors fix the pose obtained by the vision and restore the external and inertial parameters of the system by optimizing the pre-integration of the IMU. Thirdly, the result of the previous step is used to perform visual-inertial joint optimization to further refine the external and inertial parameters. Findings The results of public data set experiments and actual experiments show that this method has better accuracy and robustness compared with the state of-the-art. Originality/value This method improves the accuracy of external parameters calibration and initialization and prevents the system from falling into a local minimum. Different from the traditional method of solving inertial navigation parameters separately, in this paper, all inertial navigation parameters are solved at one time, and the results of the previous step are used as the seed for the next optimization, and gradually solve the external inertial navigation parameters from coarse to fine, which avoids falling into a local minimum, reduces the number of iterations during optimization and improves the efficiency of the system.

The Design and Implement of Online Quick Calibration System Based on MEMS IMU

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

MEMS-IMU automatic calibration system design and implementation

Automated Calibration System for Imu Based on Database and Labview

Research on the Calibration Method of Micro Inertial Measurement Unit for Engineering Application.

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

A Research on Calibration of Low-Precision Mems Inertial Sensors

Initial Calibration of MEMS Inertial Measurement Unit

Compounded Calibration Based on FNN and Attitude Estimation Method Using Intelligent Filtering for Low Cost MEMS Sensor Application

Design and calibration of MIMU based on chip size micro inertial sensors

Error Calibration and Compensation of Entire Micro Inertial Measurement Unit

Online Robot Auto-Calibration Using IMU with CMAC and EKF

A progressive online external parameter calibration and initialization method for stereo-IMU system

A New Calibration Method Using Low Cost MEM IMUs to Verify the Performance of UAV-Borne MMS Payloads

Research on Calibration Method of MEMS Gyroscope Mounting Error Based on Large-Range Autocollimator

A new calibration method of MEMS IMU plus FOG IMU

A Novel Network Calibration Method for Inertial Measurement Units

New calibration method using low cost MEM IMUs to verify the performance of UAV-borne MMS payloads

Improving the Measurement Accuracy of the MEMS IMU Array by a New Calibration and Fusion Technology

A Multi-Position Calibration Algorithm for Inertial Measurement Units

Calibration of MEMS Based Inertial Measurement Unit Using Long Short-Term Memory Network