Abstract:<p>Accuracy problem is one of the most challenging issues for the application of parallel robots in manufacturing industry, and kinematic calibration is a feasible approach to solve it. Although lots of researches have brought up a diversity of calibration methods, there are still rooms for the improvement of the accuracy, efficiency and robustness of these calibration effects. In this paper, an improved method for kinematic calibration of a 5-axis parallel machining robot is proposed, which includes a new forward kinematic solution (FKS) based on dual quaternion and a modified error modeling process leading to dimensionless error mapping matrixes (EMMs). On this basis, an iterative identification procedure is schemed, and the kinematics and identification simulations are carried out. The kinematics simulation results show that the proposed FKS has wider convergence range and faster computation speed than <em>Levenberg-Marquardt</em> algorithm, while the identification simulation results show that the residual pose errors with the proposed dimensionless EMMs are lower than that with the conventional EMM in various units. Additionally, the procedure of the full pose measurement with a laser tracker and an auxiliary tool is introduced, and thereby the contrast experiments of kinematic calibration on the prototype are conducted. The experiment results indicate that the residual position and orientation errors based on the dimensionless EMM decrease by 97.67% and 86.85% of the original values, respectively, at least, and by 76.77% and 38.65% of that based on the conventional EMM, respectively, at most. Consequently, it is further confirmed that the proposed calibration method is effective in enhancing the identification accuracy of the geometric errors and improving the positioning accuracy of the studied parallel robot.</p>

Online Robot Auto-Calibration Using IMU with CMAC and EKF

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

AN AUTONOMOUS HAND-EYE CALIBRATION METHOD

Online Robot Kinematic Calibration Using Hybrid Filter With Multiple Sensors

A Hybrid Analytical and Data-driven Modeling Approach for Calibration of Heavy-duty Cartesian Robot

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Robust Kinematic Calibration for Improving Collaboration Accuracy of Dual-Arm Manipulators with Experimental Validation

Online robot calibration based on vision measurement

Adaptive Robust Invariant Extended Kalman filtering for Biped Robot.

Kinematic calibration of a 5-axis parallel machining robot based on dimensionless error mapping matrix

The Kinematic Self-Calibration Method And Simulation Of One Palletizing Robot

A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network

Online Identification of Inertial Parameters of a Robot with Partially Combined Links Using IMU Sensing

An Online Intelligent Kinematic Calibration Method for Quadruped Robots Based on Machine Vision and Deep Learning

Calibration of the internal and external parameters of wheeled robot mobile chasses and inertial measurement units based on nonlinear optimization

Multi-sensor Calibration System for Mobile Robots

Trainable Quaternion Extended Kalman Filter with Multi-Head Attention for Dead Reckoning in Autonomous Ground Vehicles

Robust Equipment-Free Calibration of Low-Cost Inertial Measurement Units

On-Line Precision Calibration of Mobile Manipulators Based on the Multi-Level Measurement Strategy

An operational calibration approach of industrial robots through a motion capture system and an artificial neural network ELM

Automatic Eye-in-Hand Calibration using EKF