THE EFFECT OF HEAVY METAL CONTENT AND DECOKING ADDITIVES ON COKING PRODUCT DISTRIBUTION
Chaolin Liang,Benxian Shen,Jichang Liu,Shikui Wu
DOI: https://doi.org/10.3969/j.issn.1005-2399.2008.10.002
2008-01-01
Abstract:The metal contents of 18 vacuum residues used as coking feedstock were analyzed and coking experiments of these vacuum residues were conducted in a tubular coking reactor.As the total metal content of vacuum residue increased,the yields of coke and gas in the products increased. Furthermore,the upward trend of the yields of coke and gas,as well as the hydrogen content in gas increased significantly with the increase of nickel and vanadium content,indicating that the existence of nickel and vanadium in feed promoted the formation of coke and gas.Aiming at reducing the yields of coke and gas and increasing the yield of liquid oil,based on the mechanism of coke formation a decoking additive was prepared by adding thermal cracking initiators,inhibitors,anti-foulants and solvents to a synthesized nonmetallic ashless dispersant.Test results showed that the decoking additive exhibited remarkable decoking and antifouling function,and the liquid product yield increased.For various vacuum residue feeds,with an additive adding dosage of about 400μg/g,the liquid yield increased by 1.50—1.68 percentage points,the yields of coke and gas reduced by0.80—1.10 and 0.55—0.81 percentage points, respectively.