Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Thermodynamic Analysis of Valve-Controled Metal Hydride Refrigeration System

Thermodynamic Analysis of Compressor-Driven Metal Hydride Refrigeration System

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Performance Analysis of a Novel Hybrid Vapor Injection Cycle with Subcooler and Flash Tank for Air-Source Heat Pumps

A thermodynamic analysis of a transcritical cycle with refrigerant mixture R32/R290 for a small heat pump water heater

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Performance Analysis to Metal Hydride Heat Pumps for Temperature Upgrading

Analysis of system performance of air source heat pump water heater

Refrigeration Performance Analysis and Its Applicability of a New Metal Hydride Couple in Auto Air-conditioning

Theoretical Performance Assessment of Low-GWP Refrigerant R1233zd(E) Applied in High Temperature Heat Pump System

Performance Analysis of Internal Heat Exchanger‐Based Quasi‐Two‐Stage Vapor Compression Heat Pump System for High‐Temperature Steam Production

Investigation on the Influences of Heat Transfer Enhancement Measures in a Thermally Driven Metal Hydride Heat Pump

Performance Analysis of a Metal-Hydride Heat Transformer Driven by Waste Heat

Dynamic modeling and performance analysis of metal hydride hydrogen storage system

Performance Simulation of Single-Stage Hydrogen Compressor Based on Metal Hydride

Dynamic Performance of Self-Operated Three-Way Valve Used in a Hybrid Air Conditioner

Thermodynamics Cycle Analysis and Numerical Modeling of Thermoelastic Cooling Systems

Simulation study on the reaction process based single stage metal hydride thermal compressor

Thermodynamic Analysis on CO2 Transcritical Two-Stage Compression Refrigerating Cycle