Abstract:Aiming at developing exhaust gas-driven automobile air conditioners, two types of systems varying in heat carriers were preliminarily designed. A new hydride pair LaNi4.61Mn0.26Al0.13/La0.6Y0.4Ni4.8Mn0.2 was developed working at 120–200°C/20–50°C/−10–0°C. P-C isotherms and reaction kinetics were tested. Reaction enthalpy, entropy and theoretical cycling coefficient of performance (COP) were deducted from Van’t-Hoff diagram. Test results showed that the hydride pair has flat plateau slopes, fast reaction dynamics and small hystereses; the reaction enthalpy of the refrigeration hydride is −27.1kJ/mol H2 and system theoretical COP is 0.711. Mean particle sizes during cycles were verified to be an intrinsic property affected by constitution, heat treatment and cycle numbers rather than initial grain sizes. Based on this work pair, cylindrical reactors were designed and a function proving metal hydride intermittent refrigeration system was constructed with heat conducting oil as heat source and water as heat sink. The reactor equivalent thermal conductivity is merely 1.3W/(mK), which still has not meet practical requirement. Intermittent refrigeration cycles were achieved and the average cooling power is 84.6W at 150°C/30°C/0°C with COP being 0.26. The regulations of cycling performance and minimum refrigeration temperature (MRT) were determined by altering heat source temperature. Results showed that cooling power and system COP increase while MRT decreases with the growth of heat source temperature. This study develops a new hydride pair and confirms its application in automobile refrigeration systems, while their heat transfer properties still need to be improved for better performance.

Refrigeration Performance Analysis and Its Applicability of a New Metal Hydride Couple in Auto Air-conditioning

Metal Hydride Work Pair Development and Its Application on Automobile Air Conditioning Systems

Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner

Performance of Ti-Mn Multicomponent Alloy and Hydride Air Conditioner with Composite Hydride Beds Used for Auto

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Prospective hydrogen storage alloy pair for bus air conditioners

Analyses of an Improved Double-Absorber Absorption Refrigeration System at Low Temperatures

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

A Standard Test Method of the Cycling Performance of Refrigerants and Its Application Research

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Hydrogen Storage Alloy Pair as a Bus Air Conditioner

Metal Hydride Refrigeration Cycle Driven by Automotive Exhaust Gas

Thermodynamic Analysis of Valve-Controled Metal Hydride Refrigeration System

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Thermodynamic Analysis of Compressor-Driven Metal Hydride Refrigeration System

DESIGN AND EXPERIMENTAL RESEARCH ON MEATL HYDRIDES AND ITS HEAT DRIVEN REFRIGERATION SYSTEMS

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Performance of a resorption cycle for recovering the waste heat from vehicles

Performance Analysis of a Metal-Hydride Heat Transformer Driven by Waste Heat