Abstract:Reasonable cutting edge preparation can eliminate microscopic defects and improve the performance of a cutting tool. The flexible fiber-assisted shear thickening polishing method was used for the preparation of cemented carbide insert cutting edge. The influences of the polishing angle and polishing speed on the cutting edge preparation process were investigated, and the cutting edge radius and K-factor were employed as evaluation indexes to evaluate the edge shape. A prediction model of the cutting edge radius was also established using the mathematical regression method. The results show that the polishing angle has a more significant effect on the cutting edge radius. The cutting edge preparation efficiency is the highest under the polishing angle of 10°, and the cutting edge radius increased from the 15 ± 2 μm to 110 ± 5 μm in 5 min. The cutting edge shape can be controlled by adjusting the polishing angle, and the K-factor varies from 0.14 ± 0.03 to 0.56 ± 0.05 under the polishing angle (from −20° to 20°). The polishing speed has a less effect on the cutting edge radius and shape, but increasing the polishing speed within a certain range can improve the efficiency of cutting edge preparation. The flank face roughness decreased from the initial Ra 163.1 ± 10 nm to Ra 5.2 ± 2 nm at the polishing angle of −20°, which is the best polishing angle for the flank face surface roughness. The ANOVA method was employed to evaluate the effective weight of the polishing angle and polishing speed on preparation efficiency. The polishing angle (86.79%) has the more significant influence than polishing speed (13.21%) on the cutting edge preparation efficiency. The mathematical regression method was used to establish the model of the prediction of the cutting edge radius with polishing angle and speed, and the models were proved rationally. The results indicate that the FF-STP is an effective method for the high consistency preparation of cemented carbide insert cutting edge.

Experimental Research on Electrochemical-machining Edge Honing Process of Cemented Carbide Gun Drill

Experimental Study on Chemical-Mechanical Synergistic Preparation for Cemented Carbide Insert Cutting Edge

Research on machining Technology of Electrospark-electrochemical Hybrid Energy Field with tungsten hole

Study of machining performance for electrochemical grinding of difficult-to-cut alloy U71Mn

Investigation of the Material Removal Mechanism in Electrochemical Discharge Drilling Using a High-Speed Rotating Helical Tool-Electrode

Edge fabrication and process optimization of precision woodworking PCD millers with disk electrical discharge machining

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

Experimental investigation of edge preparation for cemented carbide profile cutting tools using flexible abrasive jet polishing

Preparation of Cemented Carbide Insert Cutting Edge by Flexible Fiber-Assisted Shear Thickening Polishing Method

Electro-polishing of tungsten carbide ball nose end mill to improve tool life

Micro-Grinding of Electrochemically Pretreated Ultra-high-Chromium Steel

Surface texture and fractal analysis of cemented carbide cutting tools

Experimental investigation of the EDM tools coated with nano-alumina film

Study on electrochemical mechanical polishing process of silicon carbide crystal

Study on Electrical Discharge and Ultrasonic-Assisted Mechanical Combined Machining of Polycrystalline Diamond

Experimental Study and Parameter Optimization on Sustainable and Efficient Machining GH4169 with Rotating Short Arc Milling Method

Performance Analysis and Optimization of Different Electrode Materials and Dielectric Fluids on Machining of High Carbon High Chromium Steel in Electrical Discharge Machining

Influence of Different Tool Electrode Materials on Electrochemical Discharge Machining Performances

Theoretical and experimental study on micro ultrasonic-assisted electrochemical drilling with high speed electrode

Research on tool wear and surface quality in laser-assisted ultrasonic elliptical vibration cutting of cemented carbide

Research on ultrasonic vibration–assisted electrical discharge machining SiCp/Al composite