Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Ferrocene Clicked Poly(3,4-Ethylenedioxythiophene) Conducting Polymer: Characterization, Electrochemical and Electrochromic Properties

Synthesis and performances of chelating electrophosphorescent polymers based on different ancillary ligands

Click Chemistry: A Powerful and Versatile Methodology for Preparation of Ferrocene-Containing Polymers

Preparation of Multicolor Electrochromic Polymer Composite Film with Laminated Structure

Electrosynthesis and Characterization of Aminomethyl Functionalized PEDOT with Electrochromic Property

Tricolor electrochromism of copolymer based on selenophene and 3,4-ethylenedioxythiophene

Electrochemical Synthesis of Covalently Bonded Poly (3, 4-dioxyethylthiophene)–Carbon Nanotubes Composite with Enhanced Electrochromic Properties

Electrochromic Properties of Polymers/Copolymers Via Electrochemical Polymerization Based on Star-Shaped Thiophene Derivatives with Different Central Cores

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Electrochemical And Optical Properties Of The Poly(3,4-Ethylenedioxythiophene) Film Electropolymerized In An Aqueous Sodium Dodecyl Sulfate And Lithium Tetrafluoroborate Medium

Synthesis of Ferrocene-containing Polyacetylenes by Click Chemistry

“Click” on Conducting Polymer Coated Electrodes: A Versatile Platform for the Modification of Electrode Surfaces

Synthesis and Electrochromic Properties of a Novel Conducting Polymer Film Based on Dithiafulvenyl-Triphenylamine-di(n-carbazole)

(2-Formyl-1-Chlorovinyl)Ferrocene Film Electrode Prepared By Electrochemical Polymerization

Ferrocene-functionalized disubstituted polyacetylenes with high light refractivity: Synthesis through polymer reaction by using click chemistry and application as precursors to magnetic nanoparticles

Electrochemical Preparation of Covalently Bonded PEDOT ‐ Graphene Oxide Composite Electrochromic Materials Using Thiophene‐2‐methylanine As Bridging Group

Flexible, Highly Transparent, and Conductive Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar Morphology

Electrochromic properties of pyrene conductive polymers modified by chemical polymerization

Electrochemical, spectroelectrochemical, and electrochromic characterization of silicon(IV) phthalocyanine with axially ligated electropolymerizable 3,4-ethylenedioxythiophene moieties

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Effect of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT) nanotubes on electro-optical and dielectric properties of a ferroelectric liquid crystal