Abstract:Several series of Li1+/-yMn2O4+/-delta samples with the spinel structure were synthesized. These samples had different Li/Mn ratios (by varying the Li/Mn ratio used in stirling materials) and various oxygen contents (by controlling synthesis conditions, including temperature, heat-treatment time, and purging gas during both the solid-state reaction and annealing). In systematic studies of charge-discharge cycling behavior and in situ X-ray diffraction (XRD) at room temperature, it was found that both the charge/ discharge profile and the structural changes during cycling are closely related to the degree of oxygen deficiency created in the synthesis process. Their effects on the capacity fading are much more important than the Li/Mn ratio or other factors. A higher degree of oxygen deficiency is accompanied with a faster fading of capacity during cycling. In cells using spinel cathodes with an oxygen deficiency. the capacity fading during cycling occurs on both the 4.2 and 4.0 V plateaus. This behavior is quite different from that found in cathodes without an oxygen deficiency, where most of the capacity fading occurs on the 4.7 V plateau region only. Our in situ XRD results indicate clearly that the capacity fading on the 4.2 V plateau is related to the phase transition between the cubic II and cubic III (lambda -MnO2) structure, while the capacity fading on the 4.0 V plateau is related to the phase transition between the cubic I and cubic II spinel structures. The effects of oxygen deficiency on the structural phase transition of Li1+/-yMn2O4+/-delta-type materials at temperatures around 10 degreesC were also studied. It was found that this phase transition is closely related to the degree of oxygen deficiency of the material. In samples with no oxygen deficiency, this phase transition disappeared. (C) 2001 The Electrochemical Society.

Oxygen Deficiency, a Key Factor in Controlling the Cycle Performance of Mn-spinel Cathode for Lithium-Ion Batteries

Improved Cycling Performance of Oxygen-Stoichiometric Spinel Li1+xAlyMn2−x−yO4+δ at Elevated Temperature

Role of Oxygen Vacancies on the Performance of LiMn2O4 Spinel Cathodes for Lithium-Ion Batteries

Correlating Capacity Fading and Structural Changes in Li1 + y Mn2 − y O 4 − δ Spinel Cathode Materials: A Systematic Study on the Effects of Li/Mn Ratio and Oxygen Deficiency

Kinetic Control of the Li0.9Mn1.6Ni0.4O4 Spinel Structure with Enhanced Electrochemical Performance

Greatly Improved Elevated-Temperature Cycling Behavior of Li1+xMgyMn2−x−yO4+δ Spinels with Controlled Oxygen Stoichiometry

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries

Dependence of Battery Performance of Spinel Li{sub 1+x}mn{sub 2}o{sub 4} on the Preparation Method

Mitigating Evolution of Lattice Oxygen and Stabilizing Structure of Lithium-Rich Oxides by Fabricating Surface Oxygen Defects

Recent Progress of High Voltage Spinel LiMn1.5Ni0.5O4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency

Oxygen vacancies lead to loss of domain order, particle fracture, and rapid capacity fade in lithium manganospinel (LiMn₂O₄) batteries

Electrochemical and Physicochemical Behaviors of Oxygen-Deficient Manganese Spinel

Atomic-Level Changes during Electrochemical Cycling of Oriented LiMn 2 O 4 Cathodic Thin Films

Research Development on Spinel Lithium Manganese Oxides Cathode Materials for Lithium-Ion Batteries

Recent Progress of High Voltage Spinel LiMn 1.5 Ni 0.5 O 4 Cathode Material for Lithium-Ion Battery: Surface Modification, Doping, Electrolyte, and Oxygen Deficiency

Performance Improvement of Li-rich Layer-Structured Li1.2Mn0.54Ni0.13Co0.13O2 by Integration with Spinel LiNi0.5Mn1.5O4

Boosting the Electrochemical Performance of a Spinel Cathode with the In Situ Transformed Allogenic Li-Rich Layered Phase

Defect Spinel Li8n/N+4mn8/N+4o4 Cathode Materials For Solid-State Lithium-Polymer Batteries

Dependence of Battery Performance of Spinel Li1+XMn2O4 on the Preparation Method

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries