Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Study on equivalent discrete offshore pipeline model testing method

Lifting of Horizontal Subsea Pipeline with Diverse Lifting Points in Waves: Hydrodynamic Analysis

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

Assessment Model of Pipe–soil Interaction During Large-Amplitude Lateral Displacements for Deep-Water Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Influences of Pipelay Parameters on Dynamic Behavior of Deepwater J-Lay System

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Numerical model for pipeline laying during S-lay

Numerical Analysis for Pipeline Installation by S-Lay Method

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Configuration of Submarine Pipeline for Deepwater S-lay Technique

Numerical Analysis of Pipeline in J-Lay Problem

Configuration Analysis of Deepwater S-Lay Pipeline

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Pressure test method of safety assessment on existed submarine pipeline

<title>Research Progress on Submarine Pipeline Laying Technology

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Analytical Prediction of Pipeline Behaviors in J-Lay on Plastic Seabed

Interaction between catenary riser and soft seabed: Large-scale indoor tests