Abstract:This study investigated the effects of NO2 on the selective catalytic reduction (SCR) of NO by NH3 over Cu/SAPO-34 catalyst at temperatures ranging from 100 to 500 degrees C. The Cu/SAPO- 34 sample was hydrothermally treated at 750 degrees C for 4 h to obtain a de-greened sample and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the structure of the catalyst. SCR activity test, kinetic analysis, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ-DRIFTS) were all applied to evaluate the changes in catalytic activity in the presence of various NO/NO2 ratios. The SCR results for different NO/NO2 molar ratios demonstrated that NO2 inhibited the NOx removal efficiency over the Cu/SAPO-34 catalyst at low temperatures (100-280 degrees C), but enhanced the efficiency at high temperatures (above 280 degrees C). The amount of N2O was observed to increase with decreasing NO/NO2 ratios, owing to the decomposition of NH4NO3. The kinetic results showed that the fast SCR reaction exhibited a higher apparent activation energy (E-a=64.02 kJ.mol(-1)) than that of the standard SCR reaction (E-a=48.00 kJ.mol(-1) over Cu/SAPO-34 catalyst. The results of in situ-DRIFTS showed that NO2 did not efficiently generate nitrate species on Cu2+ sites compared with NO, and that some nitrate species combined with NH4+ on Bronsted acid sites to generate NH4NO3. The inhibitory effect of NO2 at low temperatures is evidently caused by deposited NH4NO3 covering the active sites of Cu/SAPO-34 catalyst, while these NH4NO3 species can be reduced by NO or thermally decomposed as the temperature increases.

Influence of H2O2 Additive on SNCR Process

Experimental and Modeling Study on the Influence of H2 Addition on Selective Non-catalytic Reduction Process

Experimental Study of the Influences of Additives on Selective Non-catalytic Reduction Process and Ammonia Oxidation

Effects of hydrogen peroxide, sodium carbonate, and ethanol additives on the urea-based SNCR process

Investigation on Effects of Water Vapor on Selective Non-Catalytic Reduction of NO_x

Experimental Study on Isothermal SNCR Process of NOx Removal

Action of oxygen and sodium carbonate in the urea-SNCR process

RESEARCH STATUS OF LOW-TEMPERATURE DENITRIFYING CATALYSTS

Overview of mechanisms of promotion and inhibition by H2O for selective catalytic reduction denitrification

Experimental and Modeling Study on the Mechanism and Sensitive Parameters of the Thermal DeNOx Process

Effect of oxygenated liquid additives on the urea based SNCR process

Experimental Study of Selective Non-catalytic Reduction of NO by NH_3

Effects of Preparation Parameters on the DeNOx Performance of V2O5/TiO2 Catalysts

Experimental and Kinetic Study on the Influence of Iron Oxide on the Selective Noncatalytic Reduction Deno(X) Process

Denitrification of Ammonia and Nitrate Through Supercritical Water Oxidation (SCWO): A Study on the Effect of NO3−/NH4+ Ratios, Catalysts and Auxiliary Fuels

Investigation on Effects of Na2CO3 on Selective Non-Catalytic Reduction of NOx

Experimental Study and Mechanism Analysis on Selective Non-Catalytic Reduction Reactions

The influence of CO 2 and H 2 O on selective catalytic reduction of NO by NH 3 over Cu/SAPO-34 catalyst

Kinetic Study of Promoted SNCR Process by Different Gas Additives

Effects of H2O and SO2 on the Performance of V2O5/TiO2 Catalysts for Selective Catalytic Reduction of NO in Flue Gas

Effect of No2 on the Selective Catalytic Reduction of No with Nh3 over Cu/Sapo-34 Molecular Sieve Catalyst