Abstract:Polymeric optical waveguide devices with Bragg gratings have been investigated, for implementing tunable lasers and wavelength filters used in wavelength-division-multiplexed optical communication systems. Owing to the excellent thermo-optic effect of these polymers, wavelength tuning is possible over a wide range, which is difficult to achieve using other optical materials. In this study the phase-mask technology, which has advantages over the conventional interferometeric method, was introduced to facilitate the fabrication of Bragg gratings in polymeric optical waveguide devices. An optical setup capable of fabricating multiple Bragg gratings simultaneously on a 4-inch silicon wafer was constructed, using a 442-nm laser and phase mask. During fabrication, some of the diffracted light in the phase mask was totally reflected inside the mask, which affected the quality of the Bragg grating adversely, so experiments were conducted to solve this issue. To verify grating uniformity, two types of wavelength-filtering devices were fabricated using the phase-mask lithography, and their reflection and transmission spectra were measured. From the results, we confirmed that the phase-mask method provides good uniformity, and may be applied for mass production of polymer Bragg-grating waveguide devices.

Polymer Waveguide Grating Fabricated by Two-Photon Initiated Photopolymerization and Its Application As an Input Coupler

Efficient Polymer Waveguide Grating Coupler with Directionality Enhancement

A Polymer-Based Surface Grating Coupler with an Embedded Si3n4 Layer

Two-Photon Polymerization of Gratings by Interference of A Femtosecond Laser Pulse

High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides

Athermal Silicon Arrayed Waveguide Grating With Polymer-Filled Slot Structure

Vertical Coupling Between Waveguides and Optical Fibers Utilizing Polarization Gratings

Polymer/Silica Hybrid Waveguide Bragg Grating Fabricated by UV-Photobleaching

In-fiber Polymer-Glass Hybrid Waveguide Bragg Grating.

Low cost polymer sampled waveguide Bragg grating fabricated by using contact lithography

Polymer-waveguide Bragg-grating Devices Fabricated Using Phase-mask Lithography

Fabricated Technology for Polymer/si Arrayed Waveguide Grating

Fabrication of Polymer Optical Waveguides by Digital Ultraviolet Lithography

Fabrication Of 32x32 Arrayed Waveguide Grating Using Fluorinated Polymers

Fabrication-friendly High-Efficiency Silicon Nitride Grating Coupler

Fabrication of 32 × 32 Arrayed Waveguide Grating Using Fluorinated Polymers

Design and Fabrication of Polymer Arrayed Waveguide Grating

Polymer Gratings with Low Surface Relief Based on Photopolymerization-Induced Internal Diffusion

Novel Method For Fabricating Waveguide Grating By Phase Mask Technique

The 2-Μm Fully-Etched Silicon Grating Coupler

Integration of a multimode interference coupler with a corrugated sidewall Bragg grating in planar polymer waveguides