Abstract:The microstructural features and high-temperature oxidation resistance of hybrid (TiC+TiB) networks reinforced Ti-6Al-4V composites were investigated after fabricated with reaction hot pressing technique. The inhomogeneous distribution of hybrid reinforcers resulted in a sort of stress-induced grain refinement for {\alpha}-Ti matrix phase, which was further facilitated by heterogeneous nucleation upon additive interfaces. HRTEM analyses revealed the crystallographic orientation relation between TiB and alpha-Ti phases as (201)TiB//(-1100)alpha-Ti plus [11-2]//[0001] alpha-Ti, while TiC and {\alpha}-Ti phases maintained the interrelation of (-200)TiC//(-2110) {\alpha}-Ti and [001]TiC//[01-10] alpha-Ti. The hybridly reinforced Ti-6Al-4V/(TiC+TiB) composites displayed superior oxidation resistance to both the sintered matrix alloy and the two composites reinforced solely with TiC or TiB addition during the cyclic oxidation at 873, 973 and 1073 K respectively for 100 h. The hybrid reinforcers volume fraction was a more influential factor to improve oxidation resistance than the matrix alloy powder size. As temperature rose from 873 to 1073 K, the oxidation kinetics transferred from the nearly parabolic type through qusilinear tendency into the finally linear mode. This corresponded to the morphological transition of oxide scales from a continuous protective film to a partially damaged layer and ended up with the complete spallation of alternating alumina and rutile multilayers. A phenomenological model was proposed to elucidate the growth process of oxides scales. The release of thermal stress, the suppression of oxygen diffusion and the fastening of oxide adherence were found as the three major mechanisms to enhance the oxidation resistance of hybrid reinforced composites.

Oxidation behavior of (TiB+TiC)/Ti6242 matrix composites at elevated temperature

Oxidation Kinetics of in Situ Synthesized TiC/Ti Matrix Composites at Elevated Temperature

Oxidation Behavior of in Situ-Synthesized (tib+tic)/ti6242 Composites

Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing

Oxidation of in situ synthesized TiC particle-reinforced titanium matrix composites

A new high-temperature, oxidation-resistant in situ TiB and TiC reinforced Ti6242 alloy

High-temperature OM investigation of the early stage of (TiC+TiB)/Ti oxidation

High-Temperature Om Investigation Of The Early Stage Of (Tic Plus Tib)/Ti Oxidation

Oxidation Resistance of In Situ Reaction/Hot Pressing Synthesized Ti2AlC–20% TiB2 Composite at 600–900 °C in Air

The Oxidation Behaviour of Tic Matrix Ni3al and Fe40al Toughened Composites at High Temperatures

Cyclic Oxidation Behavior of TiC/Ti3AlC2 Composites at 550–950 °C in Air

High-temperature cyclic oxidation kinetics and microstructural transition mechanisms of Ti-6Al-4V composites reinforced with hybrid (TiC+TiB) networks

Oxidation Behavior of in Situ Synthesized (tic+tib+nd2o3)/ti Composites

HIGH TEMPERATURE OXIDATION BEHAVIOR OF Fe40Al/TiC COMPOSITES

Oxidation Behavior Of In Situ Synthesized Tib/Ti Composite In Air Environment

Wear Rate of Titanium Matrix Composite Coating at High Temperature Further Increased by Non-Stoichiometric TixC Oxidation

Oxidation behaviors and structural evolution of titanium matrix composites with the addition of TiBw/nano-silicide

Oxidation Behaviors of TA15 Titanium Alloy and TiBw Reinforced TA15 Matrix Composites Prepared by Spark Plasma Sintering

Oxidation Behavior of TiC-containing Ti3AlC2based Material at 500–900 °C in Air

Effect of TiB2 on Microstructure, Mechanical Properties and Oxidation Resistance of TiAl-based Alloys

Isothermal Oxidation Property of the Al2tio5/Tio(2)/Zro(2) Composite Coating on Tc4 Alloy Prepared by Micro-Arc Oxidation