Abstract:This study explores the application of the half-bridge Inductor-Inductor-Capacitor (LLC) resonant converter in Light Emitting Diode (LED) lighting driver power supplies, with a specific focus on improving efficiency and dimming capabilities. The investigation begins with an analysis of the sliding mode control (SMC) method, utilizing a constant-current design with a fixed switching frequency (FWF). A novel fuzzy frequency-selective SMC dimming strategy is proposed to recognize the challenge of significant output voltage ripple during dimming under a FSF. To address the ripple issue during dimming, an electromagnetic filtering circuit is designed, and a zero-voltage turn-on Metal—Oxide—Semiconductor (MOS) tube is introduced, incorporating a synchronous rectification scheme to mitigate losses in the secondary-side rectification diode. The study comprehensively considers a current-mode self-driven method, specifically tailored to the LLC circuit’s different operating modes. The LLC resonant circuit, along with the subsequent synchronous rectification circuit, is meticulously designed for a 252 W LED driver power supply prototype. A closed-loop simulation circuit model is developed using PSIM software in experimental validation. The feasibility of SMC based on a FSF is affirmed through a comparative analysis of SMC signal waveforms, steady-state output current (OC) models, and resonant tank current waveforms. The investigation into the OC under various SMC conditions demonstrates the half-bridge LLC resonant converter’s ability to achieve stable output with minimal ripple. The designed LED lighting circuit is applied to indoor design, providing adjustable LED brightness and switch status at different power levels. Although obstacles slightly impact the communication quality of the circuit, it remains suitable for the majority of users’ needs.

Research on constant current source for LED based on sliding mode control

Research on the Control Method of Constant Current Source Buck Converter for HB-LED

High-Precision Constant Current Controller For Primary-Side Feedback Led Drivers

A Constant Current LED Driver Based on Flyback Structure with Novel Primary Side Control

A Digital Controller Based on Primary Side Regulation with Improved Accuracy for LED Application

A Single-Stage Primary Side Controlled Flyback LED Driver

Intelligent Controller for LEDs Lighting Systems Supplied by Batteries

Discrete Pulse Frequency Modulation Control with Sliding-Mode Implementation on Llc Resonant Dc/Dc Converter Via Input-Output Linearisation

Primary Side Feedforward Control for TRIAC Dimmable Light Emitting Diode Driver with Constant Power

Evaluation of primary side control schemes for flyback converter with constant current output

Primary Side Constant Power Control Scheme for Led Drivers Compatible with Triac Dimmers

Design PV-fed LED streetlight using Soft-Switching bidirectional DC-DC converter with optimal flux control

Sliding mode current control of grid-connected voltage source converter

High-Performance Light Emitting Diode Lighting Circuits and Their Interior Design Applications

A Primary-Side Control Scheme for High-Power-Factor LED Driver With TRIAC Dimming Capability

An LED Constant Current Driver Based on the Primary Side Feedback Control Technology

Power Factor Corrected Primary Side Regulated Flyback Controller For Smart Led Lighting System

Constant-current Driving of LED Based on LM5010A

Implementation of solar LED lighting control system based on embedded target modules

Architecture and Simulation of one Constant-current and Constant-voltage Model for Driving LED Arrays

Design for White Light LED Constant-current Controllable Driving System