Abstract:Nickel-based superalloy such as Inconel 718 has worldwide applications in the manufacturing of aircraft components and defence industries due to superior properties at elevated temperatures. The importance of this material in high-temperature applications due to its excellent thermo-physical properties is subject to extensive area of interest. The machining of nickel-based superalloy is a challenging task due to generation of high heat in grinding zone which impels the study of improvement of surface quality in the present study. The main aim of the present study is to find the optimum process parameters corresponding to minimum R a value using different optimization techniques so that the production cost of components and time consumption can be minimized. In the present experimental study, investigation has been carried out on Inconel 718 through a CNC surface grinding machine. Due to the complexity involved in tough-to-machine material, the study focuses on the improvement of surface roughness using down grinding process by the optimization of three influential parameters such as wheel speed, depth of cut and table speed. Response surface methodology based central composite rotatable design is used in this study to illustrate the surface roughness value (R a ) which is greatly influenced by wheel speed followed by depth of cut and table speed. For the optimization of machining parameters, RSM coupled with genetic algorithm (GA) and particle swarm optimization (PSO) is used to reduce the time consumption in the selection of machining parameters and desirous output response in grinding. The R a value corresponding to GA is found to be 0.2735 μm while 0.2586 μm using PSO technique. The best optimal process parameters corresponding to minimum R a value using PSO technique are depth of cut = 5 μm, wheel speed = 628 m/min, and table speed = 3588 mm/min. Comparatively, PSO provided better results in terms of minimum surface roughness than GA. The validation of experimental results is done with a statistical model that has shown a fine level of corroboration among them.

Research on Surface Roughness of High Speed Milling GH4169 by Orthogonal Test Method

Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Study on milling surface quality of superalloy GH4145

Experimental study of surface integrity in ultrasonic vibration–assisted milling of GH4169 nickel-based superalloy

Analysis of Tool Wear in GH4169 Material Milling Process

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Experimental study on the machining performance of nickel-based superalloy GH4169 milled by AWJ

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Precision Prediction of Surface Roughness in High Speed Peripheral Milling Ti6Al4V Alloy

Monocrystalline Nickel Nanogrinding Subsurface Deformation-Layer Depth Study Based on Orthogonal Tests

A Processing Technical Analysis for the Characteristics of Forces and Surface Roughness in Micro-Scale Milling

Research on Surface Roughness of Supersonic Vibration Auxiliary Side Milling for Titanium Alloy

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

Experimental Study for Optimizing Superfinishing Process Parameters of High-Quality Alloy Bearing Steel

EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY— INCONEL 718

Experimental Investigations and Optimization of Surface Roughness Using Response Surface Methodology Coupled with Genetic Algorithm and Particle Swarm Optimization Techniques in Grinding of Inconel 718

Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy