Abstract:Permanent magnet torque motor (PMTM) is widely used in aerospace, computer numerical control (CNC) machine tools, and industrial robots with many advantages such as high torque density, strong overload capacity, and low torque ripple. With the upgrading of industrial manufacturing, the requirements for the performance of torque motors have become more stringent. At present, how to achieve high output torque and low torque ripple has become a research hotspot of torque motors. In the optimization process, it is necessary to increase the output torque while the torque ripple can be reduced, and it is difficult to get a good result with the single-objective optimization. In this paper, a multi-objective optimization method based on the combination of design parameter stratification and support vector machine (SVM) is proposed. By analyzing the causes of torque ripple, the output torque, efficiency, cogging torque, and total harmonic distortion (THD) of back electromotive force (EMF) are selected as the optimization objectives. In order to solve the coupling problem between the motor parameters, the calculation formula of Pearson correlation coefficient is used to analyze the relationship between the design parameters and the optimization objectives, and the design parameters are layered ac-cording to the sensitivity. In order to shorten the optimization cycle of the motor, SVM is used as a fitting method of the mathematical model. The performance between initial and optimal motors is compared, and it can be found that the optimized motor has a higher torque and lower torque ripple. The simulation results verify the effectiveness of the proposed optimization method.

Optimal Slot Opening Design for Cogging Torque Reduction of PM Motor

Analytical Cogging Torque Prediction for Surface-Mounted PM Machines Accounting for Different Slot Sizes and Uneven Positions

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Research on Torque Ripple Suppression of the Slotted Limited Angle Torque Motor

Minimization of Cogging Torque for V-Type IPMSM by the Asymmetric Auxiliary Slots on the Rotor

Reducing the Cogging Torque of PM Motor by Stator Teeth Notching

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Optimal Design of Tubular Transverse Flux Motors with Low Cogging Forces for Direct Drive Applications

Optimization of cogging torque in outer rotor Permanent Magnet Synchronous Motors based on particle swarm algorithm

Research of Cogging Torque in the Brushless DC Motor With Fractional Ratio of Slots and Poles

Analysis and Reduction of Cogging Torque in Dual PM Vernier Machine with Irregular Split Teeth

Multi-Objective Optimization Design of Permanent Magnet Torque Motor