Abstract:An optical fiber high-temperature strain sensor is proposed and fabricated which is formed by combining an in-line photonic crystal fiber Fabry-Perot interferometer（FPI） with an air bubble cavity and a long-period fiber grating（LPFG） written in a standard single mode fiber using high-frequency CO2 laser.The in-line FPI was constructed by directly splicing a mutimode photonic crystal fiber（MPCF） to a conventional single mode fiber with a commercial splicer.The air microbubble inserted between the two fibers has two smooth glass-air interfaces separated by a distance L as two reflective mirrors of the FPI.Due to big air holes in the cladding of MPCF and its large numerical aperture,this device has higher signal-to-noise ratio and fringe contrast.In addition,the bubble usually does not reduce the ultimate strength of a fusion splice,the since surface tension ensures that they have smooth walls which do not serve as stress concentrations or crack nucleation sites,so such a FPI can be used as an ideal strain sensor under high temperatures.The LPFG written by high-frequency CO2 laser can survive high temperatures up to 800 ℃ and has relatively high temperature sensitivity.Therefore,simultaneous measurements of high-temperature and strain can be realized by monitoring the wavelength shifts of the FPI and LPFG.The experimental results show that this method has strain sensitivity of 2.7 pm/με and temperature sensitivity of 0.07 nm/℃,meeting the requirements for practical applications.

Temperature and Strain Characteristic of Long Period Fiber Grating (LPFG) Induced by High Frequency CO2 Laser Pulses

High-Temperature and Strain Characteristics of Long Period Grating with Asymmetric Refractive Index Profile in the Cross Section of Fiber

Theoretical and Experimental Study on Temperature Characteristic of Long-period Fibre Grating

High Temperature Sensing Characteristics of Long-Period Fibre Gratings

High Temperature-Sensitivity Sensor Based On Long Period Fiber Grating Inscribed With Femtosecond Laser Transversal-Scanning Method

Highly Sensitive Temperature-Independent Strain Sensor Based on a Long-Period Fiber Grating with a CO$_{2}$-Laser Engraved Rotary Structure

Long-Period Fiber Grating Based High Temperature Sensor

Temperature and Transverse Load Sensing Characteristics of Twisted Long Period Fiber Gratings Fabricated by Femtosecond Laser

Strain and Temperature Sensitivities of Long Period Fiber Grating

CO 2 -Laser-induced Long Period Fiber Gratings in Few Mode Fibers

Unique Characteristics of Long-Period Fibre Gratings Fabricated by High-Frequency Co2 Laser Pulses

A Low-cost Long-period Fiber Grating -Based Sensor Device

Novel Fiber-Optic Sensors Based on Long-Period Fiber Gratings Written by High-Frequency CO/sub 2/ Laser Pulses

High Temperature Characteristics of Long-Period Fiber Gratings Written by High-Frequency CO 2 Laser Pulses

High-Temperature Annealing Behaviors of CO $_{2}$ Laser Pulse-Induced Long-Period Fiber Grating in a Photonic Crystal Fiber

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Improved femtosecond laser fabrication of long period fiber gratings and corresponding applications in high temperature measurement

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Research on Discriminating Measurement of High-Temperature and Strain Based on In-Line MPCF-FPI Combined with a LPFG

A High Sensitivity Pressure Sensor Based on Twisted Long-Period Fiber Grating