Abstract:A mathematical model for analyzing the temperature sensing properties of a metal-coated long-period fiber grating (LPFG) was presented. The influences of metal coatings on the temperature sensing properties of LPFGs were simulated and experimentally investigated. The effects of various material parameters were estimated using the single variable method of the Matlab 7.0 software. The simulation results showed that temperature sensitivity increased with an increasing elastic modulus, Poisson’s ratio, and thermal expansion coefficient of the coating metal. Both the experimental and simulated results showed that the thickness of the metal coating had a significant impact on the associated temperature sensing properties. The calculated temperature sensitivities of the LPFGs with Ni-coating thicknesses of 6.5, 5.2, and 7.2 μm were 57.27, 60.91, and 66.55 pm/°C, respectively; and with Cu-coating thicknesses of 3.8, 4.9, and 5.4 μm, the calculated temperature sensitivities were 58.17, 59.58, and 61.18 pm/°C, respectively. Compared to the experimental results, the relative errors in the simulation were less than 9.75%, indicating the feasibility of the new temperature sensing model.

Strain and Temperature Sensitivities of Long Period Fiber Grating

Strain and Temperature Characteristics of a Long-Period Grating Written in a Photonic Crystal Fiber and Its Application as a Temperature-Insensitive Strain Sensor

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Fabrication and Sensing Characterization of Thermally Induced Long Period Fiber Gratings in Few Mode Fibers

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

Highly Sensitive Long-Period Fiber-Grating Strain Sensor with Low Temperature Sensitivity

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Sensitivity-enhanced temperature sensor based on PDMS-coated long period fiber grating

Strain-insensitive temperature sensing with a dual polarization fiber grating laser

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

High-Sensitivity Strain and Temperature Simultaneous Measurement Sensor Based on Multimode Fiber Chirped Long-Period Grating

Sensing characteristics of long period grating by writing directly in SMF-28 based on 800 nm femtosecond laser pulses

Metal Coatings on Long-Period Fiber Gratings and the Implementation of an Associated Sensing Model

Fibre-optic sensing applications of a pair of long-period fibre gratings

Global overview of the sensitivity of long period gratings to strain

High Sensitivity Chiral Long-Period Grating Sensors Written in the Twisted Fiber

Strain and temperature sensor based on S-taper embedded in long-period grating

Fabrication of Phase-Shifted Long-Period Fiber Grating and Its Application to Strain Measurement