Abstract:Here, we reported some simulated atmospheric corrosion studies of magnesium alloy (including AZ91D and AM60) based on electrochemical impedance spectroscopy and polarization technology, and the effect of rare earth element Ce or La on corrosion behavior of magnesium alloy. In the case of AZ91D magnesium alloy, the electrochemical results reveal that the corrosion rate of AZ91D under thin electrolyte layers (TELs) is slower than that in bulk solution and decreases with the TEL thickness thinning. Bothe the anodic and cathodic reactions are restrained under TELs, especially in thickness thinning to around 200 μm and lower. For AM60 magnesium alloy and pure magnesium, the corrosion processes are also inhibited by decreasing thickness of TEL. All those corrosion rates and behavior of magnesium and its alloy are different from that of aluminum, copper and zinc alloy, which are due to the special cathodic reaction for magnesium alloy. Rare earth elements Ce or La have a strong effect on the dissolution of AM60 magnesium alloy under TEL. Typical impedance diagrams consist of two capacitive arcs at high and intermediate frequencies in all cases. At low frequencies, an arc or tail in the Nyquist plots appears sometimes disappears due to the complex corrosion reaction. Comparing to AM60, AM60 with rare earth element addition presents the 3rd capacitive loop sometimes instead of an inductive tail under the TEL thicknesses of 200 and 300 μm, which is associated with reaction taking place on the cathodic intermetallic compounds formed with rare earth elements. The EIS and polarization measurements indicate the rare earth element alloying can reduce corrosion rate of AM60 and AZ91D both under TEL and in bulk electrolyte.

Influence of Rare Earth Element Ce and La Addition on Corrosion Behavior of Az91 Magnesium Alloy

EFFECT OF CERIUM AND LANTHANUM ALLOYING ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF AZ91 MAGNESIUM ALLOY

Effect of Rare Earth Element Ce and La on Corrosion Behavior of AM60 Magnesium Alloy

The effect of Ca and rare earth elements on the microstructure, mechanical properties and corrosion behavior of AZ91D

EFFECT OF TRACE CE ON THE MICROSTRUCTURE AND CORROSION RESISTANCE OF AZ91 MAGNESIUM ALLOY

Corrosion Resistance of RE-AZ91 Magnesium Alloys

The Effect of Re and Ca on Corrosion Resistance of Az91

Preparation and corrosion resistance of rare earth conversion coatings on AZ91 magnesium alloy

Effects of Nd and Ce on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy

Effects of La and Nd Co-addition on microstructure and mechanical properties of as-cast AZ91 magnesium alloy

Influence of mixed rare earth elements(Y and Ce) on the microstructure and corrosion behaviour of Mg-4Al-3Ca alloy

Corrosion Behaviour of AM60 Magnesium Alloys Containing Ce or La under Thin Electrolyte Layers. Part 2: Corrosion Product and Characterization

Enhanced corrosion resistance of the as-cast AZ91 magnesium alloy by micro-addition of the strontium and rare earth elements

Effect of La on the Mechanical Property and Corrosion Resistance of Az91d Magnisum Alloy

Effect of La on the Corrosion Resistance of Az91d Magnesium Alloy in Nacl Aqueous Solution

The Effect of Rare Earths Additions on the Microstructure and the Corrosion Behavior of Sn-0.7Cu-0.075Al Solder Alloy.

Effect of Ce on Corrosion Resistance of AZ91 Magnesium Alloy

Influence of Rare Earth Element (Y) on Microstructure and Corrosion Behavior of Hot Extrusion AZ91 Magnesium Alloy

Magnesium Alloy Corrosion under Thin Electrolyte Layer Using Electrochemical Impedance Spectroscopy and Polarization Curve

Influence of Microalloying with Ca and Ce on the Corrosion Behavior of Extruded Mg-3Al-1Zn

Microstructures, tensile properties and corrosion behavior of die-cast Mg–4Al-based alloys containing La and/or Ce