Abstract:The (Ba0.95,Sr0.05)TiO3/epoxy nanocomposite were prepared using the bar‐coating technique. Adding γ‐APS silane functional nano‐(Ba,Sr)TiO3 with a finely tuned interface plays a crucial role in significantly increasing the glass transition temperature and exhibiting good thermal stability. The dielectric constant improved by ~1.5 times compared to the neat epoxy resins and the nanocomposite incorporating (Ba,Sr)TiO3 non‐modified silane sample. This paper reports polymer composites′ microstructure and dielectric properties based on an epoxy resin matrix containing different amounts (from 2–10 wt. %) of barium strontium titanate nanoparticles. (Ba,Sr)TiO3 was prepared using the hydrothermal method, showing an average particle size of 100 nm. The composites′ thermal properties and morphology were characterized using thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Our studies show that the (Ba,Sr)TiO3 nanoparticles were well dispersed in the epoxy resin matrix thanks to controlled silane functionalization. Accordingly, the glass transition temperature (Tg) value of the nanocomposites was found to be 159.0 °C at 10 wt. % (Ba,Sr)TiO3 loading and is higher than the neat epoxy resin Tg (Tg=154.7 °C). Moreover, the dielectric composite properties were investigated comprehensively via a wide range of frequencies from 10 Hz to 100 kHz. The results indicate that (Ba,Sr)TiO3 nanopowders and the surface modifying filler play a crucial role in the significant increase of the dielectric constants, approximately 1.5 times at the optimum added amount (Ba,Sr)TiO3. The limited functionalization of (Ba,Sr)TiO3 nanoparticles by the silane affords to control the nanocomposite dielectric loss. Furthermore, the nanocomposites also exhibited good thermal stability.

Preparation and Properties of Nano-SiO2/TDE-85/BMI/BADCy Composites

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Curing, Thermal Stability and Composite Properties for Blends of the Novel Bismaleimide and Cyanate Containing Naphthalene

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Cyanate Ester/Functionalized Silica Nanocomposite: Synthesis, Characterization and Properties

Novel Bismaleimide Resin/Silsesquioxane and Titania Nanocomposites by the Sol-Gel Process: the Preparation, Morphology, Thermal and Thermo-mechanical Properties

Study on nano-Si3N4/cyanate ester resin electronic encapsulating material

Mechanical, Dielectric and Thermal Stability of Silicon Oxynitride Nanoparticle Dispersed Tamarind Fiber-Reinforced Epoxy Bio-composite

Preparation and characterization of Bismaleimide resin/titania nanocomposites via sol-gel process

High-Thermal Stable Epoxy Resin through Blending Nanoarchitectonics with Double-Decker-Shaped Polyhedral Silsesquioxane-Functionalized Benzoxazine Derivatives

The Role of Silanization of Barium Strontium Titanate Nanopowders on the Dielectric Constant and Thermal Stability of Epoxy Nanocomposites

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano‐SiO2 and hyperbranched polyimide

Double-Decker-Shaped Polyhedral Silsesquioxanes Reinforced Epoxy/Bismaleimide Hybrids Featuring High Thermal Stability

Molecular Dynamics Simulations of Al2O3/Epoxy Nano-composite with Improved Heat-Resistance and Elastic Modulus

Influences of Nano-Si02 on Property of PPO/BCE Composites

Synthesis of a comb-like silicone-epoxy co-polymer with high thermal stability and mechanical properties for ablative materials

Preparation and Characterization of Bismaleimide-Resin-Based Composite Materials

PDMS/TiO2 and PDMS/SiO2 Nanocomposites: Mechanical Properties' Evaluation for Improved Insulating Coatings

Curing Behavior of UV-Initiated Surface-Modified Nano-TiO2/Epoxy Resin Prepolymers and the Properties of Cured Composites

Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica

Improved performance of Bis-GMA/TEGDMA dental composites by net-like structures formed from SiO 2 nanofiber fillers