Abstract:Bisphenol A dicyanate (BADCy) resin microparticles were prepared by precipitation polymerization synthesis and were homogeneously dispersed in a BADCy prepolymer matrix to prepare a BADCy self-reinforced composites. The active functional groups of the BADCy resin microparticles were characterized by Fourier transform infrared (FT-IR) spectroscopy. The results of an FT-IR curve showed that the BADCy resin microparticles had a triazine ring functional group and also had an active reactive group -OCN, which can initiate a reaction with the matrix. The structure of the BADCy resin microparticles was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). From the TEM results, the BADCy resin microparticles dispersed in the solvent were nano-sized and distributed at 40-60 nm. However, from the SEM results, agglomeration occurred after drying, the BADCy resin particels were micron-sized and distributed between 0.3 μm and 0.6 μm. The BADCy resin prepolymer was synthesized in our laboratory. A BADCy self-reinforced composite was prepared by using BADCy resin microparticles as a reinforcement phase. This corresponds to a composite in which the matrix and reinforcement phase are made from different morphologies of the same monomer. The DSC curve showed that the heat flow of the microparticles is different from the matrix during the curing reaction, this means the cured materials should be a microscopic two-phase structure. The added BADCy resin microparticles as reaction sites induced the formation of a more complete and regular cured polymer structure, optimizing the cross-linked network as well as increasing the interplay between the BADCy resin microparticles and prepolymer matrix. Relative to the neat BADCy resin material, the tensile strength, flexural strength, compressive strength and impact strength increased by 98.1%, 40.2%, 27.4%, and 85.4%, respectively. A particle toughening mechanism can be used to explain the improvement of toughness. The reduction in the dielectric constant showed that the cross-linked network of the self-reinforced composite was more symmetrical and less polar than the neat resin material, which supports the enhanced mechanical properties of the self-reinforced composite. In addition, the thermal behavior of the self-reinforced composite was characterized by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The results of DMTA also establishes a basis for enhancing mechanical properties of the self-reinforced composite.

Cyanate Ester/Functionalized Silica Nanocomposite: Synthesis, Characterization and Properties

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Curing, Thermal Stability and Composite Properties for Blends of the Novel Bismaleimide and Cyanate Containing Naphthalene

Synthesis, Cure Kinetics and Thermal Properties of the 2,7-Dihydroxynaphthalene Dicyanate

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Study on the Relationships between Microscopic Cross-Linked Network Structure and Properties of Cyanate Ester Self-Reinforced Composites

Synchronously improved wave-transparent performance and mechanical properties of cyanate ester resins via introducing fluorine-containing linear random copolymer

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Effect of Surface Functionalization of Molybdenum Disulfide Nanosheets with Polysulfone on Cyanate Ester Nanocomposites

Investigation on curing reaction of phthalonitrile resin with nanosilica and the properties of their glass fiber‐reinforced composites

Cyanate ester resin based composites with high toughness and thermal conductivity

Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica

Study of E-51 Epoxy Resin Modified Bisphenol A Cyanate Ester Resins

Hybrid Network Structure And Mechanical Properties Of Rodlike Silicate/Cyanate Ester Nanocomposites

Linear polyborosiloxane for improving the flame-retardancy of cyanate ester resin

Biobased Cyanate Ester Composites with Epoxidized Soybean Oil and in Situ Generated Nano-Silica

Investigating of epoxy nanocomposites structure and properties that contain both pristine and aminosilane-treated silicon carbide (SiC) particles

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials

Controllable confinement nano-reinforced organic-inorganic cyanate ester resin with optimal modulus and dielectric properties trade-offs