Experimental study on physical properties and pervaporation performances of polyimide membranes
Yexin Xu,Cuixian Chen,Jiding Li
DOI: https://doi.org/10.1016/j.ces.2007.01.019
IF: 4.7
2007-01-01
Chemical Engineering Science
Abstract:Five kinds of polyimide membranes have been synthesized from two dianhydrides (including pyromellitic dianhydride (PMDA) and 3, 3′4, 4′-benzophenonetetracarboxylic dianhydride (BTDA)) and three diamines (including 4,4′-diaminodiphenylether (ODA), 4,4′-diaminodiphenylmethane (MDA) and phenylenediamine (PDA)) via a two-step method, and the properties of polyimide membranes have been characterized by experimental techniques. The permeation experiments of water/ethanol mixtures through the polyimide membranes were carried out at 318, 328, 338 and 348K. All polyimide membranes in this paper are water selectivity, and the flux of mixtures through MDA-based polyimide membranes is higher than that of solvents through PDA-based polyimide membranes with the same diahydrides, while the separation factor exhibits the opposite variation order at the same temperature. The total flux and the partial water flux through all the membranes increase with the operating temperature rising, and the relationships between the flux and temperature can be described by Arrhenius equation. According to the Arrhenius equation, the active energies of water/ethanol in PMDA–ODA, PMDA–MDA, BTDA–PDA, BTDA–ODA and BTDA–MDA membranes are 35.1, 52.6, 16.4, 19.8 and 27.1kJ/mol, respectively, and those for partial water flux in PMDA–ODA, PMDA–MDA, BTDA–ODA and BTDA–MDA are 36.1, 46.8, 19.9 and 27.9kJ/mol, respectively. The separation factors of mixtures in the polyimide membranes but no PMDA–MDA show the trend of increase with the operating temperature. The partial flux of ethanol increases while the separation factor of mixtures in PMDA–MDA decreases with the operating temperature, and the activation energy for partial ethanol flux in PMDA–MDA is 75.2kJ/mol. In addition, pervaporation performances were attempted to correlate independently with the fractional free volume (FFV) and mean interchain distance (d-spacing) of polymers. It is shown that lnJ increases with d-spacing, while there is no clear relationship between the flux and FFV.