Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Research of FE Tire Model Oriented to Virtual Experiment of Off-Road Vehicle Trafficability

Research on simplified tire finite element modeling and simulation method

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Simulation on Driving Performance of the Vehicle Based on Modeling Tire

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Finite Element Modeling of Interaction Between Non-Pneumatic Mechanical Elastic Wheel and Soil

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Finite Element Formulation of Tire with Static Foundation Contact and Its Application

Tire Modeling of Rolling Properties Using Experimental Modal Parameters

An Implicit To Explicit Fea Solving Of Tire F&M With Detailed Tread Blocks

An Advancement in Truck-Tire–Road Interaction Using the Finite Element Analysis

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

A Tire-Pavement Contact Model Derived from Measured Tire Characteristics

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

A Volumetric-Based Tire Model For Both Longitudinal And Lateral Maneuvers

Driving Performance Of Off-Road Vehicle Matching With Tire By Simulation

Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validation

Prediction Of Tire Cornering Behavior With An Enhanced Friction Model

Application of Hyperelastic Constitutive Models in Finite Element Analysis on Tires

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches