Abstract:In this study, a magnetic field perpendicular to the electric field is introduced to the gear‐cylinder dielectric barrier discharge (DBD) to enhance the plasma density and improve the volatile organic compounds removal performance at atmospheric pressure. Higher discharge intensity, enlarged plasma streamers region, and better toluene removal performance are obtained after introducing a 0.2 T magnetic field due to the intensified ionization reactions caused by the Larmor movement of electrons. Time‐resolved Intensified Charge‐coupled Detector images indicate that both the propagation velocities of the primary and secondary streamers are enhanced and their durations are prolonged by the magnetic field. The optical emission spectra results imply that the vibrational temperature (Tvib) of N2(C‐B) and the reduced electric field (E/N) are promoted by applying the magnetic field, while the rotational temperature (Trot) of N2(C‐B) is rarely affected by the magnetic field. There is an optimal combination between the electric field and magnetic field in the gear‐cylinder DBD reactor, according to the mechanism of the magnetically assisted DBD plasma. The pulsed discharge current, toluene removal efficiency, and energy yield with the magnetic field are increased by 26%–40%, 50%–70%, and 7%–20% within the range of 16–20 kV, respectively, compared to those without the magnetic field, implying that magnetically assisted DBD plasma presents superior toluene degradation performance compared to common DBD plasma. This study reports a novel approach to improve the plasma density and degradation efficiency by introducing a perpendicular magnetic field to nonthermal plasma induced by a gear‐cylinder nanosecond pulsed dielectric barrier discharge. The magnetically assisted plasma presents higher discharge intensity, faster streamer propagation, and superior plasma degradation efficiency than the common dielectric barrier discharge plasma, it is expected to provide an efficient and low energy consumption approach for plasma chemistry applications.

Experimental Study of SO2Removal by Pulsed DBD along with the Application of Magnetic Field

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Promoting volatile organic compounds removal by a magnetically assisted nanosecond pulsed gear‐cylinder dielectric barrier discharge

Effect of Magnetic Field on Multi-parameters of Needle Plate DBD Ozone Generator

Removal of SO2F2 by the Packed Bed Dielectric Barrier Discharge Plasma

Decomposition Treatment of So2f2 Using Packed Bed Dbd Plasma Followed by Chemical Absorption

Abatement of Malodorants from Pesticide Factory in Dielectric Barrier Discharges.

Study of the Desulfurization by High Frequency Dielectric Barrier Discharge

Effect of packed quartz pellets on DBD plasma treating with NO

A Comparative Study of Water Electrodes Versus Metal Electrodes for Excitation of Nanosecond-Pulse Homogeneous Dielectric Barrier Discharge in Open Air

Nanosecond-pulse dielectric barrier discharge using magnetic compression solid-state pulsed power

Realization of meter-scale and high-density of charged particles by surface dielectric barrier discharge

Air Disinfection by Nanosecond Pulsed DBD Plasma

Study on ozone generation from H2S and NH3 removal by pulsed corona discharge

Ultrasonic-enhanced Phosphorus Sludge Excited O3 Coupled Red Mud Simultaneous Desulfurization and Denitrification

Magnetic field improving the ozone production in an atmospheric pressure surface dielectric barrier discharge: understanding the physico-chemical mechanism behind the low energy consumption

Excitation of Atmospheric Pressure Uniform Dielectric Barrier Discharge Using Repetitive Unipolar Nanosecond-Pulse Generator

Comparison of Experiment and Simulation on Dielectric Barrier Discharge Driven by 50hz AC Power in Atmospheric Air

Novel Multineedle-to-cylinder Plasma Coupled with Bimetallic Catalysts for Efficient Removal of Sulfides and Ammonia in Odor Gases

Characteristics of Nanosecond-pulse Dielectric Barrier Discharge in Atmospheric Air