Abstract:Optical strain sensors [optical fiber strain (OFS] based on optical frequency domain reflection (OFDR) are an optical sensor with great application value and the ability to achieve distributed detection. However, both the external ambient temperature and the strain contribute to the frequency shift of the Rayleigh scattering spectrum in the optical fiber during the measurement. This means that the problem of temperature compensation (TC) must be considered when detecting strain in the environment with temperature field, especially in high-temperature environment. In this article, a method of double-wire-based single optical fiber was proposed to aim at this problem, which makes one single fiber have two functions of TC and strain sensing at the same time. The contact strain sensing experiment was carried out on the conventional standard single-mode fiber (SMF)-128 polyimide-coated (PI) distributed OFS sensor (DOFSS) under high-temperature conditions (0 °C–300 °C). The TC for the strain measurement of optical fiber sensor-based OFDR was effectively realized by performing data fusion operation on the measurement results of TC and strain sensing, and the relationship between the temperature change rate and the compensation error rate (ER) was obtained. In addition, the noncontact fiber stretching sensing experiment under ultrahigh-temperature (50 °C–600 °C) conditions was carried out for the first time, which further verified the effectiveness of the method for the compensation of the fiber strain measurement error. Feasibility especially provides a simple and effective method for the application of strain measurement technology in high-temperature environment.

Study on temperature effect of BOTDR-based optical fibers

Study On Frequency Response Characteristics Of High-Temperature Fiber Optic Sensor Head

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

The Use of BOTDR to Evaluate the Thermal Effects on Fiber Residual Strain of Optical Fiber Cables

A Study on the Jacket Effect of Fiber Optic Sensors

Experimental Research on an Optical Fiber Temperature and Stress Sensor Based on the Time Offset

Temperature and Strain Discrimination in BOTDA Fiber Sensor by Utilizing Dispersion Compensating Fiber

Study on calibration of distributed optical fiber sensors based on BOTDR

The Effect of Temperature on the Fiber Strain in Reeled Optical Cables

BOTDR Optic Fiber Temperature Monitoring Technique and Its Application in Civil Engineering

Double-Wire-Based Single Distributed Optical Fiber Strain Sensing Method in High-Temperature Environment

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Simultaneous Measurement of Strain and Temperature Distributions Using Optical Fibers with Different GeO2 and B2O3 Doping

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

Determination of thermal residual strain in cabled optical fiber with high spatial resolution by Brillouin optical time-domain reflectometry

Jacket Effect on Strain Measurement Accuracy for Distributed Strain Sensors Based on Brillouin Scattering

The Impact of Optical Fiber Type on the Temperature Measurements in Distributed Optical Fiber Sensor Systems

Theoretical and Experimental Analyses on Strain Transferring of Distributed Optical Fiber Sensor

Advanced Fiber Optic Sensing for Cryogenic Simultaneous Temperature and Strain Measurement