Abstract:Optical strain sensors [optical fiber strain (OFS] based on optical frequency domain reflection (OFDR) are an optical sensor with great application value and the ability to achieve distributed detection. However, both the external ambient temperature and the strain contribute to the frequency shift of the Rayleigh scattering spectrum in the optical fiber during the measurement. This means that the problem of temperature compensation (TC) must be considered when detecting strain in the environment with temperature field, especially in high-temperature environment. In this article, a method of double-wire-based single optical fiber was proposed to aim at this problem, which makes one single fiber have two functions of TC and strain sensing at the same time. The contact strain sensing experiment was carried out on the conventional standard single-mode fiber (SMF)-128 polyimide-coated (PI) distributed OFS sensor (DOFSS) under high-temperature conditions (0 °C–300 °C). The TC for the strain measurement of optical fiber sensor-based OFDR was effectively realized by performing data fusion operation on the measurement results of TC and strain sensing, and the relationship between the temperature change rate and the compensation error rate (ER) was obtained. In addition, the noncontact fiber stretching sensing experiment under ultrahigh-temperature (50 °C–600 °C) conditions was carried out for the first time, which further verified the effectiveness of the method for the compensation of the fiber strain measurement error. Feasibility especially provides a simple and effective method for the application of strain measurement technology in high-temperature environment.

The Effect of Temperature on the Fiber Strain in Reeled Optical Cables

The Use of BOTDR to Evaluate the Thermal Effects on Fiber Residual Strain of Optical Fiber Cables

Research on the cable tension control of spatial steel sturucures consideiung temperature effect

Determination of thermal residual strain in cabled optical fiber with high spatial resolution by Brillouin optical time-domain reflectometry

Study on temperature effect of BOTDR-based optical fibers

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Experimental Study on Stress Relaxation Properties of Structural Cables

A Study on the Jacket Effect of Fiber Optic Sensors

Research of Simultaneous Measurement of Temperature and Strain of Fiber Optic Cable Material

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Stress Transfer Performance of Strain Sensing Cable

Double-Wire-Based Single Distributed Optical Fiber Strain Sensing Method in High-Temperature Environment

Effects of temperature and low strain rate on tensile performance of aramid fiber bundle

Experimental Study on Cross-sensitivity of Temperature and Strain of Fiber Optic Bragg Gratings

Strain Transfer Mechanisms and Mechanical Properties of Optical Fiber Cables

The stability of optical fiber as strain sensor under invariable stress

Investigation of bending and temperature effects in optical fibers

Deformation Study on Carbon-Fiber Braided Composite Subjected to Low Temperature Cycle

Study on the Fixation Technique of Optical Fiber Based on BOTDR

Transition of Optical Fiber Delay Coefficient under the Action of Fiber Coating at Low Temperature