Abstract:Aiming at developing cost-effective bonded permanent magnets, the microstructure, magnetic properties, thermal stability, corrosion resistance, and mechanical properties of bonded (La,Ce,Y)-Fe-B magnet were investigated and compared with Nd-Fe-B and (Nd,La,Ce)-Fe-B magnets. Only RE2Fe14B and Ce(La) grain boundary phases were found in the melt-spun (La,Ce,Y)-Fe-B alloy with a composition of [(Ce0.7La0.3)(0.8)Y-0.2](17)Fe(7)8B(6), and no paramagnetic CeFe2 phase was detected, which is beneficial to hard magnetic properties. Bonded (La,Ce,Y)-Fe-B magnet exhibits a combination of magnetic properties with intrinsic coercivity Hcj = 330 kA/m, remanence Jr = 0.40 T, and maximum energy product (BH)max = 21.7 kJ/m(3), compared to Hcj = 519 kA/m, Jr = 0.52 T, and (BH)max = 43.8 kJ/m(3) for (Nd,La,Ce)-Fe-B magnet and Hcj = 751 kA/m, Jr = 0.66 T, and (BH)max = 75.3 kJ/m3 for Nd-Fe-B magnet. Despite its relatively low hard magnetic properties, (La,Ce,Y)-Fe-B magnet exhibits the highest performance/cost ratio. In the temperature range of 300-400 K, (La,Ce,Y)-Fe-B magnet shows better thermal stability than Nd-containing magnets, demonstrated by the high temperature coefficient of coercivity (-0.181%/K). The corrosion processed of bonded magnets are studied, and (La,Ce,Y)-Fe-B magnet exhibits better corrosion resistance than other magnets. The mechanical properties of various bonded magnets were also investigated and the highest compressive strength was obtained in (La,Ce,Y)-Fe-B magnet, possibly due to its higher density and the less brittleness of (La,Ce,Y)-Fe-B alloy. This work is beneficial to accelerating the industrialization of high abundance RE magnets.

STUDY OF HIGH DENSITY ISOTROPIC FERRITE POWDER FOR BONDED MAGNETS

Fabrication and Magnetic Properties of FINEMET Alloy Powder Cores

High Performance Rare Earth Nd-Fe-B Bonded Magnets

Trial-manufacture of High Performance Bonded Permanent Ferrite Materials by Injection Molding

Study on Bonded Hybrid Magnets

Fabrication of Low-Cost Nd–Fe–B Sintered Magnets Reusing Ultrafine Powders

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Construction of High-Performance Multi-Main-phase Nd–Dy–Fe–B Sintered Magnets with Strengthened Chemical Heterogeneity

Extra up-spin magnetic moments and extraordinary high saturation magnetization of Ni2+ doped barium ferrite in 4f(2) site

Preparation of Anisotropic Bonded NdFeB/SmFeN Hybrid Magnets by Mixing Two Different Size Powders

An Ultrafine Barium Ferrite Powder of High Coercivity from Water-In-Oil Microemulsion

An effective route for tuning microstructure and properties of sintered Nd-Fe-B magnets: Low pressure sintering technology

Nd-Fe-B Sintered Magnets with Low Rare Earth Content Fabricated Via Dy71.5Fe28.5 Grain Boundary Restructuring

Study on Influencing Factors of High-Temperature Basic Characteristics of Iron Ore Powder and Optimization of Ore Blending

STUDY ON BONDED FERRITE POWDER WITH HIGH PERFORMANCE AND LOW Cr~(6+) CONTENT

A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication

Coercivity enhancement of NdFeB sintered magnets by low melting point Dy32.5Fe62Cu5.5 alloy modification

Fe-based Bulk Amorphous Alloys with Iron Contents As High As 82At%

Development of Bonded (La,ce,y)-Fe-b Permanent Magnets with Higher Performance/Cost Ratio Than Nd-Fe-B and (Nd,la,ce)-Fe-b Magnets

Development of High Performance Dry-Press Anisotropic Permanent Magnet Ferrites

Rapid coercivity increment of Nd–Fe–B sintered magnets by Dy69Ni31 grain boundary restructuring