Abstract:Adequate thermal integrity of brazed joints is a critical feature of a state-of-the-art compact heat exchanger design. New generations of aluminum compact heat exchangers with highly augmented heat transfer surfaces (such as micro-channeled extruded tubes in conjunction with composite AA3003/AA4343 multi-louvered fin foils) can provide significantly enhanced thermal performance—if the related manufacturing process, e.g., controlled atmosphere brazing (CAB) is performed flawlessly. However, empirical evidence indicates that often, even under a very tight brazing process control, design requirements imposed by heat transfer considerations lead to a more or less poor joint formation. This paper deals with an analysis of thermal features of a fin-tube joint as a function of topological alterations of the AA4343 joint filet size formed by materials processing during brazing. These alterations are caused by poor wetting and/or pronounced Si diffusion and/or increased liquid clad penetration. These phenomena lead to a less than optimal joint formation and will be illustrated by both empirical evidence and theoretical predictions. Based on numerical predictions of a joint topology formed by the surface tension driven reactive flow of molten metal, and subsequently verified by empirical evidence gathered through both laboratory and industrial testing, several topology alterations were devised as being representative for thermal integrity studies, and thermal characteristics of corresponding fin-tube joints were determined in terms of the spreading thermal contact resistance and corresponding temperature fields. Numerical predictions of joint topology were devised with an in-house developed finite element code and verified by Surface Evolver code. Temperature distributions established within selected fin-tube joint configurations were simulated using CFD software (FLUENT). Experimental data were obtained using a computer controlled transparent hot zone with an ultra high purity nitrogen background atmosphere.

Molten aluminum equilibrium membrane formed during controlled atmosphere brazing

Isothermal Solidification of Micro Layers of Molten Aluminum Alloys

Non-Equilibrium Diffusion-Controlled Melting and Re-Solidification of Thin Metal Layers on a Reactive Substrate

Scaling of Molten Metal Brazing Phenomena: Prolegomena for Model Formulation

Diffusion-Controlled Melting and Re-Solidification of Metal Micro Layers on A Reactive Substrate

Influence of Topological Characteristics of a Brazed Joint Formation on Joint Thermal Integrity

Metallurgical interactions in solid/liquid diffusion couples of AA4343/AA3xxx/AA4343 layered aluminum sheet

An Analysis of an Impact of the Background Atmosphere on the Aluminum Brazing Joint Formation

Prediction of the Fillet Mass and Topology of Aluminum Brazed Joints

Numerical modelling and experimental verification of the formation of 2D and 3D brazed joints

Formation of Microlayers of Clad Residue on Aluminium Brazing Sheet During Melting and Resolidification in Brazing Process

Dendritic growth in Al–Si alloys during brazing. Part 2: Computational modeling

Mechanism and Process of the Intermetallic Compound Particles Reinforced Tial/Steel Brazing Seam

Interfacial structure and properties of reactive brazing joints of TiAl/Ni-based alloy

Effect of pre-strain on the brazing characteristics of a high-strength aluminum brazing sheet with a barrier layer

SURFACE TENSION DRIVEN MOLTEN METAL FLOW OVER FLAT AND/OR GROOVED REACTIVE SURFACES DURING BRAZING AND SOLDERING

Interfacial Microstructure and Mechanical Properties of AZ31B/AA7075 Joints Using Non-Equilibrium Thermal Compensation Resistance Welding

Wetting and joint-formed characteristics of amorphous Ni-based filler metal foil and its influence on brazed joint formation

Application of a New Ultrasonic-Assisted Semi-Solid Brazing on Dissimilar Al/Mg Alloys

Contact-reaction Brazing of an AZ31 Magnesium/3003 Aluminum Alloy Using a Silver-Copper-zinc Interlayer

Interfacial Microstructure and Phase Constitution of the Cu/Al Dissimilar Metals Joint Made by Contact Reactive Brazing