Catalytic properties of CuO/Sn<sub>0.9</sub>Ti<sub>0.1</sub>O<sub>2</sub> and CuO/Sn<sub>0.7</sub>Ti<sub>0.3</sub>O<sub>2</sub> in NO+CO reaction

Xiao-yuan Jiang,Feng Du,Xu Zhang,Yan-rong Jia,Xiao-ming Zheng
DOI: https://doi.org/10.1631/jzus.2007.A1839
2007-01-01
Abstract:Using SnxTi1-x O-2 as carriers, CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 catalysts with different loading amounts of copper oxide (CuO) were prepared by an impregnation method. The catalytic properties of CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 were examined using a microreactor-gas chromatography (GC) NO+CO reaction system and the methods of BET (Brunauer-Emmett-Teller), TG-DTA (themogravimetric and differential thermal analysis), X-ray diffraction (XRD) and H-2-temperature programmed reduction (TPR). The results showed that NO conversions of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 were 47.2% and 43.6% respectively, which increased to 95.3% and 90.9% at 6 wt% CuO loading. However, further increase in CuO loading caused a decrease in the catalytic activity. The nitrogen adsorption-desorption isotherm and pore-size distribution curve of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 represented type IV of the BDDT (Brunauer, Deming, Deming and Teller) system and a typical mesoporous sample. There were two CuO diffraction peaks (2 theta 35.5 degrees and 38.7 degrees), and the diffraction peak areas increased with increasing CuO loading. TPR analysis also detected three peaks (alpha, beta and gamma) from the CuO-loaded catalysts, suggesting that the alpha peak was the reduction of the highly dispersed copper oxide, the beta peak was the reduction of the isolated copper oxide, and the gamma peak was the reduction of crystal phase copper oxide. In addition, a fourth peak (delta) of the catalysts meant that the SnxTi1-x O-2 mixed oxides could be reductive.
What problem does this paper attempt to address?