Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Behavior of A New Type of Self-locked Joint of Concrete-filled Steel Tubular Column and Steel Beam

Behavior of Hybrid FRP-Concrete-Steel Tubular Columns: Experimental and Theoretical Studies

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

Analysis of a New H-section Beam to Rectangular Tube Column Connection

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Experimental study on seismic behaviors of a new type of frame joint between concrete-filled rectangular steel tubular columns and steel beams

Design and seismic performance analysis of a novel special-shaped steel tube concrete column steel beam joint

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Experimental research on H-section beam-square steel column joints connected by self-tapping screws

Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints

Experimental study and finite element analysis on the new type connections of a project

Behaviour of concrete-encased concrete-filled steel tubular column to steel beam joints under cyclic loading

Experimental study on a new type of precast beam-column joint

New Connection System for Confined Concrete Columns and Beams. I: Experimental Study

Research on Behavior of the Joint with Concrete-filled Steel Tubular Column Under Pre-load in Steel Tube

Investigation on Shear Capacity of Joints between Steel Reinforced Concrete Special-Shaped Column and Reinforced Concrete Beam

Research on Shear Capacity of Concrete-Filled Square Steel Tubular Column to Unequal Height Steel Beam Joint with External Diaphragm

Research on seismic performance of prefabricated concrete-filled steel tubular frame joints