Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

Numerical Simulation on Influencing Factors of the Developing Height of Water Flowing Fractured Zone in Shallow Seams

Study on Water-flowing Fractured Zone Development Height in Lower Slicing Mining of Contiguous Seams

The Height of Water-Conducting Fractured Zones in Longwall Mining of Shallow Coal Seams

The influence of mining height on the height of water flowing fractured zone

Research of Height of Water Flowing Fractured Zone of Sub-level Caving Mining of Extremely Thick Coal Seam Through Numerical Simulation

Numerical Simulation and Site Measurement of Development Height of Fractured Zone in Overburden Strata

Study on Simulation and Testing Technology of the Height of Roof Water Flowing Fractured Zone

Numerical Simulation and Engineering Practice of Overburden Failure Law in Multiple Seams Mining

Simulation study on the evolution of the overlying strata fractures and air-leaking passage under repeated mining of shallow buried coal seams

Study on the evolution of fractures in overlying strata during repeated mining of coal seams at extremely close distances

A study on the height of water leaking fissures zone induced by top coal caving longwall mining in extra thick coal seams

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Physical Simulation of the Water-Conducting Fracture Zone of Weak Roofs in Shallow Seam Mining Based on a Self-Designed Hydromechanical Coupling Experiment System

Research on the Distribution of Overlying Rock Fractures Caused by Mining in Ultra-Thick Coal Seams and Its Impact on the Near-Surface Aquifer

Study on Fracture Evolution and Water-Conducting Fracture Zone Height beneath the Sandstone Fissure Confined Aquifer

Study on Height Development Characteristics of Water-Conducting Fracture Zone in Fully Mechanized Mining of Shallow Thick Coal Seam under Water

Numerical Simulation of Mine Water Inflow with an Embedded Discrete Fracture Model: Application to the 16112 Working Face in the Binhu Coal Mine, China

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Numerical Study of Hydraulic Fracturing Fracture Area Changing Rules in Underground Coal Mine

Simulation Study on Development Laws of Water Flowing Fractured Zone Under Different Angles of Lateral Pressure

Numerical Simulation Study of Strata Behavior Regularity of Ascending Mining in Close Distance Coal Seams