Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

What problem does this paper attempt to address?

This paper aims to solve the problem of the development of water - conducting fractures in the roof with faults under the condition of repeated mining in thick coal seams. Specifically, the research focuses on the formation of water - conducting fractures in the overlying strata due to underground coal mining. This may not only lead to roof water - inrush accidents, but also may cause the water - conducting fractures to penetrate the aquifer, triggering mine water - inrush accidents and resulting in the loss of water resources. This phenomenon is particularly significant in extra - thick coal seams and fault - developed areas. Therefore, predicting the failure range of the mining - induced overlying strata by numerical simulation methods is of great significance for protecting water resources and avoiding water - inrush accidents. To achieve this goal, the author established a constitutive model of rock deformation - discrete block movement and interaction in combination with the Mohr - Coulomb criterion. Based on this model and combined with the engineering - geological conditions of Yuanshupo Coal Mine, a numerical model of the development of water - conducting fractures in the roof with faults under the condition of repeated mining in extra - thick coal seams was established. The research results show that through the constitutive relationship of continuous deformation - discrete block interaction and the corresponding finite - element - discrete - element (FDEM) numerical program and the VUSDFLD multi - coal - seam continuous - mining sub - program, the formation process of faults and water - flow fractures in the overlying strata during the continuous mining process of extra - thick multi - coal seams can be numerically realized. The research shows that under the disturbance of repeated mining in multi - thick coal seams, the toughness of sandstone - mudstone is low, and the fractures will further develop and finally stabilize between 216 - 226 meters, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, stress concentration occurs in the fault and its overlying strata, resulting in local fracture and fracture formation of the roof rock mass, and the fault group makes this phenomenon more obvious. These results have been preliminarily applied and verified in the Ningwu mining area, providing theoretical support for roof water - inrush control under the condition of extra - thick coal seams and avoiding the loss of water resources in surface water and underground aquifers.

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Physical Simulation of the Water-Conducting Fracture Zone of Weak Roofs in Shallow Seam Mining Based on a Self-Designed Hydromechanical Coupling Experiment System

Finite–Discrete Element Method Prediction of Advanced Fractures in Extra-Thick Coal Seams Based on a Constitutive Model of Rock Deformation–Fragmentation Failure Process

Research on the Distribution of Overlying Rock Fractures Caused by Mining in Ultra-Thick Coal Seams and Its Impact on the Near-Surface Aquifer

Evolution mechanism of water-conducting fractures in overburden under the influence of water-rich fault in underground coal mining

Water Inrush Mechanism of Roof Induced by the Fault Weakening Effect in the Coal Mining

Evolution of mining-induced water inrush disaster from a hidden fault in coal seam floor based on a coupled stress–seepage–damage model

Study on Fracture Evolution and Water-Conducting Fracture Zone Height beneath the Sandstone Fissure Confined Aquifer

Study of water-conducting fractured zone development law and assessment method in longwall mining of shallow coal seam

Rock Damage Model Coupled Stress–Seepage and Its Application in Water Inrush from Faults in Coal Mines

Study on the damage characteristics of overburden of mining roof in deeply buried coal seam

Characteristics Analysis of Roof Overburden Fracture in Thick Coal Seam in Deep Mining and Engineering Application of Super High Water Material in Backfill Mining

Fracture Propagation and Hydraulic Properties of a Coal Floor Subjected to Thick-Seam Longwalling above a Highly Confined Aquifer

Numerical Modeling and Investigation of Fault-Induced Water Inrush Hazard under Different Mining Advancing Directions

Investigating Disaster Mechanisms Triggered by Abrupt Overburden Fracture Alterations in Close-Seam Mining Beneath an Exceptionally Thick Sandstone Aquifer

Physical modeling of floor failure above confined water: a case study in China

Study on the evolution of fractures in overlying strata during repeated mining of coal seams at extremely close distances

Modeling Rock Fracture Propagation and Water Inrush Mechanisms in Underground Coal Mine

Theoretical and numerical investigations of the floor failure characteristics affected by coal mining near complex fault structures

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Evolution and control of overburden fracture in extra-thick coal seam mining with hard roofs: ground grouting sealing and case study