Abstract:A polypropylene (PP) film is usually used as a dielectric material in capacitors as well as cables. However, PP films may degrade because of the combined effect of temperature and electric field. In an earlier study, plain PP films and PP films loaded with nano-metric natural clay were studied under sinusoidal (AC) electric fields at power frequency and temperatures above the ambient. To better understand the electrical characteristics of PP film under various conditions, the objective of this study is to determine the time-to-breakdown of the plain PP and PP filled with 2% (wt) natural nano-clay when subjected to time-invariant (DC) electric fields at elevated temperatures. In order to achieve this objective, the effects of uniform as well as non-uniform electric fields were compared at the same temperature for the PP film. In this study, experimental results indicated that the time-to-breakdown of all PP films, plain or filled with nano-clay, decreases with the increase in electric field intensity, non-uniformity of the electric field, and temperature. It was also found that the time-to-breakdown of PP film filled with 2% (wt) natural nano-clay under DC electric field is longer and less sensitive to temperature. Furthermore, when compared with the results under the uniform electric field, PP film filled with 2% (wt) nano-metric natural clay indicates shorter time-to-failure under non-uniform DC electric fields. Finally, the morphology of the samples was observed by digital camera, optical micrography, and SEM, to better understand the mechanism of the breakdown.

The Study on Electroluminescence in Both High and Low Density Polyethylene Films

Experimental Study of Low-Voltage -Driven Thin Film Electroluminescence Mechanism

Experimental study of excitation efficiency distribution in low-voltage-driven thin film electroluminescent devices

Study on the mechanism of organic thin film electroluminescence

Study of Organic Electrolumenescent Thin Film Cell

Field-dependent properties of electroluminescent devices based on DCM-doped poly(p-phenylene vinylene) derivatives

Pre-Stressing Effect on Dc Breakdown in Low-Density Polyethylene

The electroluminescence property of poly [(p-phenylene-ethynylene)-alt-(hexyl unit)]

PL and EL properties of a novel Eu-containing copolymer

Effects of Electric Field on the Electronic Structures in Electroluminescent Polymers

Photoluminescent and Electroluminescent Properties of DCM-1 Dispersed Poly(p-Phenylene Vinylene) Derivatives

Electroluminescence and Surface Trap Distribution in Polymeric Insulation

Electroluminescence Performance Optimization of Films based on the Change of Macroscopic Structure and Microscopic Calculation

Effect of Crystallinity of Polyethylene with Different Densities on Breakdown Strength and Conductance Property

Electroluminescence and Electrical Degradation of Insulating Polymers at Electrode Interfaces under Divergent Fields

Photoluminescence And Electroluminescence From Plasma Polymerized Naphthalene Films

Surface Electroluminescence Phenomena of Insulating Polymers

Photoluminescence And Electroluminescence Of Poly-P-Phenyl Phenol Prepared By Enzymatic Catalyzed Polymerization

High Repetition Rate Space Charge Measurement of Heat-treated Low-density Polyethylene at Prebreakdown

Study on Electroluminescence Phenomena from Ptfe under Hvac

Electrical Property of Polypropylene Films Subjected to Different Temperatures and DC Electric Fields