Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

Study on Process Parameters and Springback Rule for Stamping of High Strength Steel Sheet

Numerical Simulation and Experimental Validation of Distortional Springback of Advanced High-Strength Steel Sheet Metal Forming

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

Numerical Analysis of Springback in the Stamping of Tailor Welded Blanks

Sensitivity Analysis of Effect of Material Properties to Spring-back of High Strength Steel

Investigation of Springback Behavior and Process Control for Stamping of Ring-Shaped Workpiece

Research on springback characteristic in flexible multi-points 3D stretch-bending process

Experiment and Numerical Simulation of Springback of Laminated Steel Sheet in U-channel Forming Process

Study on Springback for TRIP-aided Steel Sheet

Experimental research of the bending springback property on advanced high strength steel

Springback law of high-strength 21-6-9 stainless steel tube in numerical control bending under different process parameters

Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value

Springback prediction of stamping GH3536 alloy sheet with complex surface

Analysis of Mechanism of Springback in 22MnB5 Super-high Strength Steel Forming

The Control of Springback for Forming of Advanced Ultra High Strength Martensitic Steel

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Analysis on the Effects of Numerical Simulation Precision on Springback Prediction

Study on Factors Affecting Springback and Application of Data Mining in Springback Analysis

Springback Research and Control about Mini-Car Beam Based on Variable Blankholder Force Technology