Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Springback prediction continues to play a special role in the process design of sheet metal forming processes. During the forming process, elastic energy is stored in the sheet metal, which is released after the tool is opened. The dimensional accuracy and the function of the component in particular can be negatively affected by this. For this reason, the springback is predicted by means of numerical modeling in order to improve the process design. The simulation accuracy depends primarily on the used material model to map the stress-dependent material behavior and the quality of the experimental input data. High-strength aluminum alloys, which have a distinctive springback behavior, have a slightly pronounced tensile-compressive asymmetry. Since tensile and compressive stresses often occur in sheet metal forming processes, the consideration of this effect can lead to an improvement in springback prediction. Besides modeling the yield locus curve for describing the yield strength in the plane stress area, the yield curve data is also relevant for determining the strain hardening behavior. The work hardening is usually characterized by the tensile test or the hydraulic bulge test, which is used to describe the material behavior in the tensile stress state. A promising experimental method for the analysis of the material in the uniaxial compressive stress state is the sheet metal upsetting test. In addition to a local characterization of sheet metal materials, this test also enables the investigation of the material behavior at significantly higher plastic strains than in the tensile test. Thus, in this contribution it is examined to what extent the sheet metal upsetting test is suitable for improving the springback prediction quality of material models in sheet metal forming processes.

Numerical Analysis of Springback in the Stamping of Tailor Welded Blanks

Study on Process Parameters and Springback Rule for Stamping of High Strength Steel Sheet

Integration process of stamping and welding for DP600 advanced high strength steel sheets

Sensitivity Analysis of Effect of Material Properties to Spring-back of High Strength Steel

Numerical Simulation and Experimental Validation of Distortional Springback of Advanced High-Strength Steel Sheet Metal Forming

Springback Control in Complex Sheet-Metal Forming Based on Advanced High-Strength Steel

Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value

A Comparison Study of Different Hardening Models in Springback Prediction for Stamping of the Third Generation Ultra High Strength Steel

Effect of complicated deformation behaviors during cold stamping on springback prediction of DP980 steel

Improving the Accuracy of Stamping Analyses Including Springback Deformations

Research on the control of the warpage springback induced by non-uniform local deformation

A new predicting model study on U-shaped stamping springback behavior subjected to steady-state temperature field

Eliminating Springback Error in U-Shaped Part Forming by Variable Blankholder Force

Numerical simulation of hot stamping for high strength steel

Numerical Simulation of Springback of Force-displacement Separated Control Multi-point Forming for Sphere

Numerical springback prediction for high-strength aluminum alloys based on the sheet metal upsetting test

Analysis on the Effects of Numerical Simulation Precision on Springback Prediction

Numerical Simulation on Formability of Tailor-Welded Blank with Curved Weld-Line under Different Blank Holder Forces

Springback Research and Control about Mini-Car Beam Based on Variable Blankholder Force Technology

The Numerical Simulation of U-channel Springback and Optimization of Forming Parameters

Springback Simulation of the Inner Door Panel of the Laser Tailor-welded Blanks