Abstract:In this study LiFePO4/C composite particles were synthesized using five different carbon sources via a one-step sol-gel method. La-doped LiFePO4 was also synthesized using the sol-gel method. The XRD pattern of LixLayFePO4 (x = 0.9~1.0, y = 0~0.1) after being calcined at 700 °C for 10 h indicates that as the doping ratio increased, the sample's cell volume first increased then decreased, reaching a maximum value of 293.36 Å3 (x = 0.94, y = 0.06). The XRD patterns of Li0.92La0.08FePO4 after being calcined at different temperatures for 10 h indicate that with increasing calcination temperature, the (311) diffraction peak drifted toward a smaller diffraction angle. Similarly, the XRD patterns of Li0.92La0.08FePO4 after being calcined at 700 °C for different durations indicate that with increasing calcination times, the (311) diffraction peak drifted toward a larger diffraction angle. The infrared spectrum pattern of LixLayFePO4 (x = 0.9~1.0, y = 0~0.1) after being calcined at 700 °C for 10 h shows absorption peaks corresponding to the vibrations of the Li–O bond and PO43- group. An SEM analysis of LixLayFePO4 (x = 1, y = 0; x = 0.96, y = 0.04; x = 0.92, y = 0.08) after being calcined at 700 °C for 10 h indicates that the particles were irregular in shape and of uniform size. The hysteresis loops of Li0.92La0.08FePO4 after being calcined at 600 °C, 700 °C, or 800 °C for 10 h indicate that with increasing calcination temperature, the Ms gradually increased, while the Mr and Hc decreased, with minimum values of 0.08 emu/g and 58.21 Oe, respectively. The Mössbauer spectra of LixLayFePO4 (x = 1, y = 0; x = 0.96, y = 0.04; x = 0.92, y = 0.08) after being calcined at 700 °C for 10 h indicate that all samples contained Doublet(1) and Doublet(2) peaks, dominated by Fe2+ compounds. The proportions of Fe2+ were 85.5% (x = 1, y = 0), 89.9% (x = 0.96, y = 0.04), and 96.0% (x = 0.92, y = 0.08). The maximum IS and QS of Doublet(1) for the three samples were 1.224 mm/s and 2.956 mm/s, respectively.

Preparation and Electrical Properties of LaFeO3 Compacts Using Chemically Synthesized Powders

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Sonochemical synthesis of nanocrystalline LaFeO3

Dielectric and Ferroelectric Properties of LaFeO3 Particles Derived from Metal Organic Frameworks Precursor

Structure And Magnetic Properties Of Co2.73fe0.27o4 Synthesized By The Heat-Decomposition Method

Preparation, Characterization and Optical Property of LaFeO3 Nanoparticles via Sol-Gel Combustion Method

Preparation of Crystalline LaFeO3 Nanoparticles at Low Calcination Temperature: Precursor and Synthesis Parameter Effects

Investigation of Precursors in the Preparation of Nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ Via a Modified Combined Complexing Method

A comprehensive exploration of pure and Zn doped LaFeO3 nanoparticles synthesized by solid state mechanism for charge storage devices

Auto-combustion synthesis of nanocrystalline LaFeO3

Synthesis of Cobalt Ferrite Nanoparticles and Effect of Doped Lanthanum on Magnetic Properties of Cobalt Ferrite

Preparation of Mesoporous La2Sn2O7 Powder and Ag-La2Sn2O7 Electrical Contact Composite Materials and Their Properties

Molecular Crystal Structure Simulations and Structure- Magnetic Properties of LiFePO4 Composite Particles Optimized by La

Electrical and Structural Properties of La(Fe,M)O3 (M = Mn, Ni, Cu)

Synthesis and Structural Characterization of LaOFeP Superconductors

Investigations on physical properties of (Sm, Ni) co-doped LaFeO3 perovskite

Electrospinning Preparation of LaFeO 3 Nanofibers

Low-temperature Synthesis and Characterizations of LaFeAsO Nanocrystals

Synthesis of Al3+-Substituted La M-Type Hexaferrite for in Situ Ceramic Composite Processing

Multiferroic Properties of La-Doped Bi2fecro6 Prepared by High-Pressure Synthesis

A Simple Way to Prepare Nanosized LaFeO 3 Powders at Room Temperature