Abstract:Flow fields can enhance the peak power density of redox flow batteries through distributing the electrolyte and thus reactants uniformly in the porous electrode. However, due to the distinct mechanisms of serpentine and interdigitated flow fields for mass transfer enhancement, the effectiveness of different flow fields is highly dependent on design and operating parameters of the flow cell, such as electrode material, channel's dimension, applied flow rate, and applied current density. The significant computational costs induced by the 3-D or 2-D numerical model on the one hand, and the demand for a deep understanding with respect to the effects of the different flow fields on the flow cell under varying geometric and operating conditions on the other hand, call for an analytical approach. Therefore, the present study establishes an analytical model for quantifying the mass transfer and the electrochemical overpotentials in the flow cell with the serpentine or the interdigitated flow fields. The validity of the analytical model is confirmed by comparisons with experimental and 3-D numerical simulation results under varying electrode materials and channel dimensions. Parametric study results show that the properties changes affect the flow cell implemented with different flow fields paradoxically. First, for the flow cell utilizing electrodes corresponding to a relatively high specific surface area and a low permeability, the interdigitated flow field is more worthy of recommendation, while as the permeability of the electrodes increases, the serpentine flow field becomes more competitive. Second, widening channel's and rib's widths is an effective approach to decrease the concentration overpotential for the interdigitated flow field, while its effects on that with the serpentine flow field is opposite. These results are expected to provide a valuable guidance for the application of interdigitated and serpentine flow fields in flow cells.

Numerical simulation of current field in aluminum reduction cells using erm and fem

Numerical Simulation of Flow Batteries Using a Multi-scale Macroscopic-Mesoscopic Approach

Simulation and Analysis of Magnetic Fields and Flow Fields of Metal Pad in 75 Ka Drained Style Aluminum Reduction Cell

Analysis of anode current distribution in aluminum electrolysis cell based on equivalent circuit numerical simulation

An Analytical Model for Parametric Study on Serpentine and Interdigitated Flow Fields in Redox Flow Batteries

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Numerical Simulation Study on Gas Collecting System of 400 kA Grade Aluminum Electrolytic Cell

Influences of various aluminum accumulation sump designs on thermal stress distribution in drained aluminum reduction cell

Numerical Simulation of Three-Dimensional Electric Field of High Current Rare Earth Electrolytic Cell

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell

Numerical simulation study of the effect of anodic bubble behavior in aluminum electrolysis cell

A Numerical Assessment of Anodic Large Bubble on Horizontal Current in Metal Pad of Aluminum Electrolytic Cells

Numerical investigation on the feasibility of metal foam as flow field in alkaline anion exchange membrane fuel cell

A Transient Model of the Anodic Current Distribution in an Aluminum Electrolysis Cell

Finite element analysis of magnetohydrodynamics stability of an aluminlium reduction cell

Numerical Simulation of Cathode Nodule Local Effects

Numerical Simulations in a Three-dimensional Model of Direct Methanol Fuel Cell Anode Using Computational Fluid Dynamics Method

Multidimensional Modelling Of Polymer Electrolyte Fuel Cells Under A Current Density Boundary Condition

A 3-D Numerical Model to Predict Low Temperature Aluminum Electrochemical Process Using Ionic Liquids as Electrolytes at Different Boundary Conditions

Mode Coupling Analysis of Interfacial Stability and Critical Anode–Cathode Distance in a 500-kA Aluminum Electrolysis Cell

Thermo-mechanical Studies of Thimble Geometry and Stub Materials for Voltage Drop Across the Anode-Rod Connection in Aluminum Electrolysis Cell