Abstract:Hexagonal boron nitride nanosheets (BNNS) integrating many extraordinary properties are usually combined with polymers to fabricate multifunctional dielectric materials for energy storage and thermal management. Unfortunately, the existing technologies for producing BNNS generally have the disadvantages of inefficiency and low product quality, which significantly hinder the wide application of high-value nanocomposites. Herein, a novel poly(vinyl alcohol) (PVA)-assisted pan-milling method based on the innovative solid-state shear milling (S3 M) technology is reported for the production of high-quality BNNS. The uniform three-dimensional (3D) shear force field generated by pan milling not only ensured the high aspect ratio of BNNS (the average lateral size of ∼954 nm and the average thickness of ∼3.7 nm) but also induced the mechanochemical reaction between PVA and BNNS to achieve in situ grafting modification on the BNNS surface. The simultaneous high-quality exfoliation and surface modification of BNNS positively contributed to the mechanical, dielectric, and thermal conduction properties of BNNS/PVA nanocomposites. At the BNNS content of 10 wt %, the BNNS/PVA composite film exhibited excellent robustness (Young's modulus of 5305 MPa and the tensile strength of 83 MPa), with a satisfactory breakdown strength (Eb of 134.7 MV/m) and dielectric constant (∼5 at 1000 Hz). In addition, the substantial improvement of thermal conductivity (from 0.88 to 5.59 W·m-1·K-1) guaranteed the stability of the dielectric properties of the nanocomposites at high temperatures. This pan-milling method characterized by green and efficiency is highly scalable to other two-dimensional (2D) layered materials, providing a practical strategy for the industrial fabrication of nanocomposites in elevated-temperature energy storage.

Hydrothermal Mass Production of MgBO2(OH) Nanowhiskers and Subsequent Thermal Conversion to Mg2B2O5 Nanorods for Biaxially Oriented Polypropylene Resins Reinforcement

Green, Noncorrosive, Easy Scale-Up Hydrothermal–Thermal Conversion: A Feasible Solution to Mass Production of Magnesium Borate Nanowhiskers

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Preparation of Magnesium Hydroxide Chloride Hydrate Nanowires Using Calcined Dolomite

Hydrothermal Synthesis and Characterization of Magnesium Borate Hydroxide Nanowhiskers

Influence of process parameters on hydrothermal formation of magnesium borate hydroxide nanowhiskers

Hydrothermal synthesis of whisker-like magnesium borate hydroxide (MgBO2(OH)) nanoflakes

Flux-Assisted Thermal Conversion Route To Pore-Free High Crystallinity Magnesium Borate Nanowhiskers At A Relatively Low Temperature

Morphology Preservation and Crystallinity Improvement in the Thermal Conversion of the Hydrothermal Synthesized Mgbo2(Oh) Nanowhiskers to Mg2b2o5 Nanowhiskers

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Preparation, growth mechanism, and application of Mg2B2O5 whiskers: A review

Synthesis of Magnesium Borate Nanorods by Sol-Gel Process

Enhanced wear resistance while maintaining transparency of epoxy resin coatings filled with novel one-dimensional magnesium borate hydroxide nanorods

Poly(vinyl Alcohol)-Assisted Exfoliation and Grafting Modification of Boron Nitride Nanosheets with a High Aspect Ratio Via a Continuous Production Method for Energy Storage and Thermal Management.

Magnesium-induced Preparation of Boron Nitride Nanotubes and Their Application in Thermal Interface Materials.

Synthesis of magnesium borate (Mg2B2O5) nanowires, growth mechanism and their lubricating properties

Large-scale Fabrication of Boron Nitride Nanotubes and Their Application in Thermoplastic Polyurethane Based Composite for Improved Thermal Conductivity

Optimization course of hexagonal boron carbide ceramic nanofiller content in polypropylene for material extrusion additive manufacturing: Engineering response, nanostructure, and rheology insights

Preferential alignment of two-dimensional montmorillonite in polyolefin elastomer tube via rotation extrusion featuring biaxial stress field

Formation of rod-like Mg(OH)2 nanocrystallites under hydrothermal conditions and the conversion to MgO nanorods by thermal dehydration

In situ synthesis of boron nitride "nanonoodles" based epoxy nanocomposites with enhanced thermal and dielectric properties