Abstract:0D, 1 D and 2 D nano lanthanum borates were prepared by changing the reaction conditions of the hydrothermal method. The effect of reaction time, pH value, temperature, and reactant molar ratio on the shapes and sizes were investigated. The as-obtained nano lanthanum borates were demonstrated by scanning electron microscope (SEM), FT-IR and water contact angle test. The dispersion stability was then evaluated by a spectrophotometry. Moreover, the tribological properties of the prepared 0 D, 1 D and 2 D nano lanthanum borates as lubricating additives in rapeseed oil were investigated on a four-ball tribo-tester. Furthermore, the contact model and underlying lubricating mechanisms were proposed based on the results of surface analysis. The results indicated that nano lanthanum borates with different shapes and sizes could be obtained by regulating the reaction conditions of a hydrothermal method. Ethanol rapid evaporation ultrasonic dispersion method and stearic acid surface modification could improve the dispersion stability of nano lanthanum borates in rapeseed oil. In addition, the as-obtained 0 D, 1 D and 2 D nano lanthanum borates could significantly facilitate the anti-wear and friction-reducing properties of rapeseed oil, especially for 2 D nanoflakes. The enhanced lubricating performance of 2 D lanthanum borate nanoflakes might be attributed to the combined action of relatively lower loads under planar contact forms, thicker and stronger adsorption film generated by plate-like additives, and the enhanced activity of boron atoms and the increased boron-permeation amount on the friction surface to form tribochemical films containing Fe2O3, B2O3 and La2O3.

Synthesis of magnesium borate (Mg2B2O5) nanowires, growth mechanism and their lubricating properties

Synthesis of Magnesium Borate (mg2b2o5) Nanowires by Chemical Vapor Deposition Method

Preparation and Tribological Properties of Surface-modified Borate Magnesium Nanoparticles

Synthesis of Magnesium Borate Nanorods by Sol-Gel Process

Synthesis of Aluminium Borate Nanowires by Sol–gel Method

Magnesium-induced Preparation of Boron Nitride Nanotubes and Their Application in Thermal Interface Materials.

Tribological study and mechanism of B–N and B–S–N triazine borate esters as lubricant additives in mineral oil

Synthesis of Boron and Boride Compounds Nanowire Arrays by Chemical Vapor Deposition

Tribological Characteristics of Boron Nitride Nanosheets on Silicon Wafers Obtained by the Reaction of MgB2 and NH3

Ultrasound-Assisted Preparation and Characterization Surface Modified Nano-Ca2B6O11

Preparation, Characterization and Tribological Evaluation of Calcium Borate Nanoparticles as Lubricant Additives

Synthesis and Tribological Characteristic of Nitrogen-containing Borate as Lubricant Additive

Preparation and Tribological Properties of a Kind of Lubricant Containing Cerium Borate Nanoparticles As Additives

Facile synthesis of lipophilic alkylated boron nitride nanosheets as lubricating oil additive to greatly enhance the friction and heat-conducting properties

Synthesis, Hydrolytic Stability and Tribological Properties of Novel Borate Esters Containing Nitrogen As Lubricant Additives

Preparation and Tribological Properties of the N‐containing Heterocyclic Borate Esters and Cu Microparticles As Lubricant Additives in Base Oil

Controllable synthesis of 0D, 1D, and 2D nano lanthanum borates and their dispersion stabilities and tribological properties in rapeseed oil

Synthesis of Hydrophobic Zinc Borate Nanodiscs for Lubrication

Growth of Boron Nitride Nanotubes from Magnesium-Based Catalysts

Preparation, Characterization, and Tribological Evaluation of A Calcium Borate Embedded in an Oleic Acid Matrix

Preparation and tribological behaviors of magnesium silicate hydroxide-MoS2 nanoparticles as lubricant additive