Abstract:Various high-end equipment relies on titanium alloy plate-fin structure (PFS) as core components, owing to their remarkable advantages in terms of low density, superior mechanical strength and enhanced corrosion resistance. Brazing assumes a pivotal function in PFS connections, whereby the localized concentrated heat during the welding procedure can precipitate intricate structural deformation and generate residual stresses. A thermomechanical coupling model was developed, taking into account the service performance criteria of PFS. The effects of process parameters and clamping methods on the post-welding residual stress and deformation of PFS were investigated. The analytical expressions for the relationship between the process parameters and the stress/ deformation were obtained by using the simulation outcomes. The constraint on the partition in the vacuum brazing process determines the extent of deformation and residual stress of PFS, with higher constraint leading to lower values. PFS generates z-directional displacement and y-directional warping deformation, and the weld seam between the fin and the partition is prone to stress concentration. As the brazing temperature and holding time increase, the PFS induces more deformation, while the residual stress value decreases. However, the deformation amount reaches a plateau when the holding time exceeds 30 min.

Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Effect of Brazing Residual Stress on Creep for Stainless Steel Plate-Fin Structure

3-D finite element analysis of residual stress and its creep relaxation at high temperature for stainless steel brazed plate-fin structure

Finite Element Analysis of Creep of Stainless Steel Plate-Fin Structure

Effect of Filler Metal Thickness on Creep for Stainless Steel Plate-Fin Structure

The Effect of Filler Metal Thickness on Residual Stress and Creep for Stainless-Steel Plate–fin Structure

Three-dimensional Numerical Simulation of Brazed Residual Stress and Its High-Temperature Redistribution for Stainless Steel Plate-Fin Structure

A Comparison of Brazed Residual Stress in Plate–fin Structure Made of Different Stainless Steel

3D Numerical Simulation of Brazed Residual Stress in Stainless Steel Plate-Fin Structure

Effect of Geometric Conditions on Residual Stress of Brazed Stainless Steel Plate-Fin Structure

Finite Element Analysis of Residual Stresses and Thermal Deformation for Brazing Plate-Fin Structure

Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure

Numerical Analysis of Residual Stress for Copper Base Brazed Stainless Steel Plate-Fin Structure

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Finite element prediction of residual stresses and thermal distortion in a brazed plate-fin structure

Numerical investigation on the effect of copper filler thickness on the brazed residual stress

Study on Distribution and Optimization of Residual Stress Inside Plate-Fin Structure after Braze Welding

Creep of Brazed Plate-Fin Structures in High Temperature Compact Heat Exchangers

A Probabilistic Evaluation Method on Temperature and Time-Dependent Stress Intensity Limit St in Creep Assessment of Components at Elevated Temperatures

Numerical Investigation of Deformation and Residual Stress in Vacuum Brazing of Titanium Alloy Plate-Fin Structure

Evaluation of the Effect of Various Prior Creep-Fatigue Interaction Damages on Subsequent Tensile and Creep Properties of 9%cr Steel