Abstract:Single-walled carbon nanohorns (SWCNHs) was utilized as an ion-to-electron transducer to fabricate all-solid-state ion-selective electrodes (ISE) for the first time. To evaluate the performance of developed SWCNHs-based calcium ISE, various electrochemical experiments were carried out. A Nernstian response (29.69 +/- 0.24 mV/decade, R-2 = 0.9996) was acquired across a broad linear range between 10(-6) and 10(-2) M, and the detection limit of 10(-6.1) M was achieved in the meantime. Additionally, water layer test and reversed chronopotentiometry were used to estimate the long-term and short-term stability of SWCNHs-based ISE, respectively, indicating SWCNHs is capable of enhancing potential stability on account of its hydrophobicity. Furthermore, a SWCNHs-based reference electrode (RE) was fabricated by directly coating a photo-polymerised reference membrane (RM) onto a SWCNHs modified electrode. Results demonstrated that the SWCNHs-based RE exhibited slight potential fluctuation for common ions with different charges over a wide concentration range of calibration. Based on these superior results, an integrated all-solid-state SWCNHs-based potentiometric sensing device combined SWCNHs-based ISE and SWCNHs-based RE was constructed for detecting calcium, which shows a Nernstian response with a slope of 27.14 mV/decade. This developed electrode in the aid of SWCNHs exhibits fast response as well as outstanding potential stability, making it extreme promising for routine sensing application.

A Study on Solid Electrolyte Potentiometric CO Gas Sensor

Au thin-film electrodes based potentiometric CO2 sensor using Li3PO4 as both the reference material and the solid electrolyte

Response Characteristics of A Potentiometric Co2 Gas Sensor Based on Li3po4 Solid Electrolyte Using Au Film As the Electrodes

Miniaturized Amperometric Solid Electrolyte Carbon Dioxide Sensors

Solid-Electrolyte Amperometric Sensor for Simultaneous Measurement of CO and CO2 in Nitrogen

Research Development of Electrochemical-Based Solid-State CO2 Sensor

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

CO2 Microelectrode Based on Zn-AI-LDH-ion Carrier and Its Characterization

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

CO2 Selective Potentiometric Sensor in Thick-film Technology

A Fully Solid-State SOx (x = 2,3) Gas Sensor Utilizing Ag-ß″-alumina As Solid Electrolyte

Solid-contact Potentiometric Sensor for Ascorbic Acid Based on Cobalt Phthalocyanine Nanoparticles As Ionophore.

Chemiresistive Sensor for Enhanced CO 2 Gas Monitoring

Fumed SiO2-H2SO4-PVA Gel Electrolyte CO Electrochemical Gas Sensor

SnO2 Highly Sensitive CO Gas Sensor Based on Quasi-Molecular-Imprinting Mechanism Design

The effects of Co doping on the gas sensing performance of In2O3 porous nanospheres

A Fuel-Cell-Type Sensor for Detection of Carbon Monoxide in Reformed Gases

Investigation of a Planar Electrochemical Carbon Monoxide Sensor Using AC Impedance Spectroscopy

Low Concentration CO Gas Sensor Based on Pulsed-Heating and Wafer-Level Fabricated MEMS Hotplate

AC impedance studies of SnO2 : Sc2O3 based CO sensor