Abstract:Gadolinia doped ceria (Ce0.9Gd0.1O1.95, GDC) electrolyte films were tape cast from oxalate coprecipitated GDC powders, gelcast GDC powders and their mixtures, respectively, to evaluate the effects of the original particle size and distribution on the properties of the green and sintered GDC cast tapes. The apparent density of different original powders, as well as the green density, sintered behavior, and electrical conductivity of tapes cast from the various starting powders were investigated. Mixing the coprecipitated and the gelcast GDC powders not only results in a higher packing efficiency of particles in the loose powders, but also results in higher green and sintered densities of cast tapes. Furthermore, tapes cast from the 50/50 powder mixtures can be sintered to 96.2% of theoretical density at relatively low sintering temperature of 1400°C, whereas those from the oxalate coprecipitated and from the gelcast powders were only 89.7 and 94.1% dense, respectively. The ac impedance measurement shows that GDC films cast from the 50/50 powder mixture exhibit good electrical conductivity (4.2 and 6.0Sm−1 at 700 and 800°C in air, respectively). The test results have revealed that high-density GDC films can be fabricated by tape casting technique at relatively low sintering temperature by optimizing the particle size distribution of the starting powders.

Increasing the sinterability of tape cast oxalate-derived doped ceria powder by ball milling

On the green density, sintering behavior and electrical property of tape cast Ce0.9Gd0.1O1.95 electrolyte films

Sintering of Ce0.8Sm0.2O1.9

Sintering of Ce（0.8）Sm（0.2）O（1.9）

Sintering behavior and electrical conductivity of Ce0.9Gd0.1O1.95 powder prepared by the gel-casting process

Characterisation of nanosized Ce0.8Sm0.2O1.9 powder made by a modified solid state reaction

Effect of B2O3 on the Aqueous Tape Casting and Microwave Properties of Li2O–Nb2O5–TiO2 Ceramics

Optimization of the Tape Casting Process for Development of High Performance Alumina Ceramics

Effects of Zro_2 Powder Characteristics and Organic Additives on Preparation of Tape Casting Film

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

Effect of Al2O3 addition on sintering behavior and properties of Ce0.8Sm0.2O1.9 electrolytes

Study on Sm2O3 and Nd2O3 Co-doped Ceria Based Electrolyte

Citric–Nitrate Combustion Synthesis and Electrical Conductivity of the Sm3+ and Nd3+ Co‐Doped Ceria Electrolyte

Mechanical Strengthening of Sm-Doped Ceo2 Ceramics by 1 Mol% Cobalt Oxide for Solid Oxide Fuel Cell Application

Synthesis of Nanocrystalline Ce<sub>0.8</sub>Sm<sub>0.2</sub>O<sub>1.9</sub> by Citrate Gel Method

Optimization of the Tape Casting Slurries for High-Quality Zirconia Substrates

Reactive Ce0.8Sm0.2O1.9 Powder Synthesized by Carbonate Coprecipitation: Sintering and Electrical Characteristics

Polyvinyl alcohol-induced low temperature synthesis of CeO2-based powders

Effect of V2O5 on the Aqueous Tape Casting of Li1.075Nb0.625Ti0.45O3 Microwave Ceramic

Influence of high-energy ball milling of the starting powder on the sintering; microstructure and oxygen permeability of Ba0.5Sr0.5Co0.5Fe0.5O3-δ membranes

Electrical Properties of Ceria Co-doped with Sm3+ and Nd3+